Chapter 72
Iron and Steel
740 tariff lines · 559 filing-ready 10-digit codes · codes begin with 72
Chapter 72 of the US Harmonized Tariff Schedule covers iron and Steel. Every code in this chapter starts with the digits 72. Work down the nested list below: the bold headings are broad categories, and the 10-digit statistical codes underneath them are what you actually declare to US Customs. Duty rates shown are the general (Column 1) rates that apply to most trading partners.
Codes in Chapter 72
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7201.10.00.00 | Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus | 10-digit statistical code | Free |
| 7201.20.00.00 | Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus | 10-digit statistical code | Free |
| 7201.50 | Alloy pig iron; spiegeleisen | 6-digit heading | |
| 7201.50.30.00 | Alloy pig iron | 10-digit statistical code | Free |
| 7201.50.60.00 | Spiegeleisen | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7202.11 | Containing by weight more than 2 percent of carbon | 6-digit heading | |
| 7202.11.10.00 | Containing by weight more than 2 percent but not more than 4 percent of carbon | 10-digit statistical code | 1.4% |
| 7202.11.50.00 | Containing by weight more than 4 percent of carbon | 10-digit statistical code | 1.5% |
| 7202.19 | Other | 6-digit heading | |
| 7202.19.10.00 | Containing by weight not more than 1 percent of carbon | 10-digit statistical code | 2.3% |
| 7202.19.50.00 | Containing by weight more than 1 percent but not more than 2 percent of carbon | 10-digit statistical code | 1.4% |
| 7202.21 | Containing by weight more than 55 percent of silicon | 6-digit heading | |
| 7202.21.10.00 | Containing by weight more than 3 percent of calcium | 10-digit statistical code | 1.1% |
| 7202.21.50.00 | Other | 10-digit statistical code | 1.5% |
| 7202.21.75.00 | Containing by weight more than 80 percent but not more than 90 percent of silicon | 10-digit statistical code | 1.9% |
| 7202.21.90.00 | Containing by weight more than 90 percent of silicon | 10-digit statistical code | 5.8% |
| 7202.29.00 | Other | 8-digit subheading | Free |
| 7202.29.00.10 | Containing by weight over 2 percent of magnesium | 10-digit statistical code | |
| 7202.29.00.50 | Other | 10-digit statistical code | |
| 7202.30.00 | Ferrosilicon manganese | 8-digit subheading | 3.9% |
| 7202.30.00.60 | Containing by weight not more than 0.10 percent of carbon | 10-digit statistical code | |
| 7202.30.00.90 | Other | 10-digit statistical code | |
| 7202.41.00.00 | Containing by weight more than 4 percent of carbon | 10-digit statistical code | 1.9% |
| 7202.49 | Other | 6-digit heading | |
| 7202.49.10.00 | Containing by weight more than 3 percent of carbon | 10-digit statistical code | 1.9% |
| 7202.49.50 | Other | 8-digit subheading | 3.1% |
| 7202.49.50.10 | Containing by weight more than 0.5 percent of carbon | 10-digit statistical code | |
| 7202.49.50.90 | Other | 10-digit statistical code | |
| 7202.50.00.00 | Ferrosilicon chromium | 10-digit statistical code | 10% |
| 7202.60.00.00 | Ferronickel | 10-digit statistical code | Free |
| 7202.70.00.00 | Ferromolybdenum | 10-digit statistical code | 4.5% |
| 7202.80.00.00 | Ferrotungsten and ferrosilicon tungsten | 10-digit statistical code | 5.6% |
| 7202.91.00.00 | Ferrotitanium and ferrosilicon titanium | 10-digit statistical code | 3.7% |
| 7202.92.00.00 | Ferrovanadium | 10-digit statistical code | 4.2% |
| 7202.93 | Ferroniobium | 6-digit heading | |
| 7202.93.40.00 | Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon | 10-digit statistical code | 5% |
| 7202.93.80.00 | Other | 10-digit statistical code | 5% |
| 7202.99 | Other | 6-digit heading | |
| 7202.99.10.00 | Ferrozirconium | 10-digit statistical code | 4.2% |
| 7202.99.20.00 | Calcium silicon | 10-digit statistical code | 5% |
| 7202.99.80 | Other | 8-digit subheading | 5% |
| 7202.99.80.20 | Ferrophosphorus | 10-digit statistical code | |
| 7202.99.80.40 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7203.10.00.00 | Ferrous products obtained by direct reduction of iron ore | 10-digit statistical code | Free |
| 7203.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7204.10.00.00 | Waste and scrap of cast iron | 10-digit statistical code | Free |
| 7204.21.00.00 | Of stainless steel | 10-digit statistical code | Free |
| 7204.29.00.00 | Other | 10-digit statistical code | Free |
| 7204.30.00.00 | Waste and scrap of tinned iron or steel | 10-digit statistical code | Free |
| 7204.41.00 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | 8-digit subheading | Free |
| 7204.41.00.20 | No. 1 bundles | 10-digit statistical code | |
| 7204.41.00.40 | No. 2 bundles | 10-digit statistical code | |
| 7204.41.00.60 | Borings, shovelings and turnings | 10-digit statistical code | |
| 7204.41.00.80 | Other | 10-digit statistical code | |
| 7204.49.00 | Other | 8-digit subheading | Free |
| 7204.49.00.20 | No. 1 heavy melting | 10-digit statistical code | |
| 7204.49.00.40 | No. 2 heavy melting | 10-digit statistical code | |
| 7204.49.00.60 | Cut plate and structural | 10-digit statistical code | |
| 7204.49.00.70 | Shredded | 10-digit statistical code | |
| 7204.49.00.80 | Other | 10-digit statistical code | |
| 7204.50.00.00 | Remelting scrap ingots | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7205.10.00.00 | Granules | 10-digit statistical code | Free |
| 7205.21.00.00 | Of alloy steel | 10-digit statistical code | Free |
| 7205.29.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7206.10.00.00 | Ingots | 10-digit statistical code | Free |
| 7206.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7207.11.00.00 | Of rectangular (including square) cross section, the width measuring less than twice the thickness | 10-digit statistical code | Free |
| 7207.12.00 | Other, of rectangular (other than square) cross section | 8-digit subheading | Free |
| 7207.12.00.10 | Having a width measuring less than four times the thickness | 10-digit statistical code | |
| 7207.12.00.50 | Having a width measuring at least four times the thickness | 10-digit statistical code | |
| 7207.19.00 | Other | 8-digit subheading | Free |
| 7207.19.00.30 | Of circular cross section | 10-digit statistical code | |
| 7207.19.00.90 | Other | 10-digit statistical code | |
| 7207.20.00 | Containing by weight 0.25 percent or more of carbon | 8-digit subheading | Free |
| 7207.20.00.25 | Having a width measuring less than four times the thickness | 10-digit statistical code | |
| 7207.20.00.45 | Having a width measuring at least four times the thickness | 10-digit statistical code | |
| 7207.20.00.75 | Of circular cross section | 10-digit statistical code | |
| 7207.20.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief | 6-digit heading | |
| 7208.10.15.00 | Pickled | 10-digit statistical code | Free |
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | 10-digit statistical code | Free |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | 10-digit statistical code | Free |
| 7208.25 | Of a thickness of 4.75 mm or more | 6-digit heading | |
| 7208.25.30.00 | Of high-strength steel | 10-digit statistical code | Free |
| 7208.25.60.00 | Other | 10-digit statistical code | Free |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 8-digit subheading | Free |
| 7208.26.00.30 | High-strength steel | 10-digit statistical code | |
| 7208.26.00.60 | Other | 10-digit statistical code | |
| 7208.27.00 | Of a thickness of less than 3 mm | 8-digit subheading | Free |
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | 10-digit statistical code | |
| 7208.27.00.45 | Other | 10-digit statistical code | |
| 7208.27.00.60 | Other | 10-digit statistical code | |
| 7208.36.00 | Of a thickness exceeding 10 mm | 8-digit subheading | Free |
| 7208.36.00.30 | High-strength steel | 10-digit statistical code | |
| 7208.36.00.60 | Other | 10-digit statistical code | |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 8-digit subheading | Free |
| 7208.37.00.30 | High-strength steel | 10-digit statistical code | |
| 7208.37.00.60 | Other | 10-digit statistical code | |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 8-digit subheading | Free |
| 7208.38.00.15 | High-strength steel | 10-digit statistical code | |
| 7208.38.00.30 | With untrimmed edges | 10-digit statistical code | |
| 7208.38.00.90 | Other | 10-digit statistical code | |
| 7208.39.00 | Of a thickness of less than 3 mm | 8-digit subheading | Free |
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | 10-digit statistical code | |
| 7208.39.00.25 | Other | 10-digit statistical code | |
| 7208.39.00.30 | With untrimmed edges | 10-digit statistical code | |
| 7208.39.00.90 | Other | 10-digit statistical code | |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief | 6-digit heading | |
| 7208.40.30 | Of a thickness of 4.75 mm or more | 8-digit subheading | Free |
| 7208.40.30.30 | Of a thickness exceeding 10 mm | 10-digit statistical code | |
| 7208.40.30.60 | Other | 10-digit statistical code | |
| 7208.40.60 | Of a thickness of less than 4.75 mm | 8-digit subheading | Free |
| 7208.40.60.30 | Of a thickness less than 3 mm | 10-digit statistical code | |
| 7208.40.60.60 | Other | 10-digit statistical code | |
| 7208.51.00 | Of a thickness exceeding 10 mm | 8-digit subheading | Free |
| 7208.51.00.30 | Universal mill plate | 10-digit statistical code | |
| 7208.51.00.45 | Of high-strength steel | 10-digit statistical code | |
| 7208.51.00.60 | Other | 10-digit statistical code | |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 10-digit statistical code | Free |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 10-digit statistical code | Free |
| 7208.54.00.00 | Of a thickness of less than 3 mm | 10-digit statistical code | Free |
| 7208.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7209.15.00.00 | Of a thickness of 3 mm or more | 10-digit statistical code | Free |
| 7209.16.00 | Of a thickness exceeding 1 mm but less than 3 mm | 8-digit subheading | Free |
| 7209.16.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | 10-digit statistical code | |
| 7209.16.00.45 | Other | 10-digit statistical code | |
| 7209.16.00.60 | Other | 10-digit statistical code | |
| 7209.16.00.70 | Annealed | 10-digit statistical code | |
| 7209.16.00.91 | Other | 10-digit statistical code | |
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 8-digit subheading | Free |
| 7209.17.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | 10-digit statistical code | |
| 7209.17.00.45 | Other | 10-digit statistical code | |
| 7209.17.00.60 | Other | 10-digit statistical code | |
| 7209.17.00.70 | Annealed | 10-digit statistical code | |
| 7209.17.00.91 | Other | 10-digit statistical code | |
| 7209.18 | Of a thickness of less than 0.5 mm | 6-digit heading | |
| 7209.18.15 | Of high-strength steel | 8-digit subheading | Free |
| 7209.18.15.30 | Annealed | 10-digit statistical code | |
| 7209.18.15.60 | Other | 10-digit statistical code | |
| 7209.18.25 | Of a thickness of less than 0.361 mm (blackplate) | 8-digit subheading | Free |
| 7209.18.25.20 | Annealed | 10-digit statistical code | |
| 7209.18.25.85 | Other | 10-digit statistical code | |
| 7209.18.60 | Other | 8-digit subheading | Free |
| 7209.18.60.20 | Annealed | 10-digit statistical code | |
| 7209.18.60.90 | Other | 10-digit statistical code | |
| 7209.25.00.00 | Of a thickness of 3 mm or more | 10-digit statistical code | Free |
| 7209.26.00.00 | Of a thickness exceeding 1 mm but less than 3 mm | 10-digit statistical code | Free |
| 7209.27.00.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 10-digit statistical code | Free |
| 7209.28.00.00 | Of a thickness of less than 0.5 mm | 10-digit statistical code | Free |
| 7209.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7210.11.00.00 | Of a thickness of 0.5 mm or more | 10-digit statistical code | Free |
| 7210.12.00.00 | Of a thickness of less than 0.5 mm | 10-digit statistical code | Free |
| 7210.20.00.00 | Plated or coated with lead, including terne-plate | 10-digit statistical code | Free |
| 7210.30.00 | Electrolytically plated or coated with zinc | 8-digit subheading | Free |
| 7210.30.00.30 | Of high-strength steel | 10-digit statistical code | |
| 7210.30.00.60 | Other | 10-digit statistical code | |
| 7210.41.00.00 | Corrugated | 10-digit statistical code | Free |
| 7210.49.00 | Other | 8-digit subheading | Free |
| 7210.49.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | 10-digit statistical code | |
| 7210.49.00.45 | Other | 10-digit statistical code | |
| 7210.49.00.91 | Of a thickness of 0.4 mm or more | 10-digit statistical code | |
| 7210.49.00.95 | Other | 10-digit statistical code | |
| 7210.50.00 | Plated or coated with chromium oxides or with chromium and chromium oxides | 8-digit subheading | Free |
| 7210.50.00.20 | Of a width less than 1050 mm | 10-digit statistical code | |
| 7210.50.00.90 | Other | 10-digit statistical code | |
| 7210.61.00.00 | Plated or coated with aluminum-zinc alloys | 10-digit statistical code | Free |
| 7210.69.00.00 | Other | 10-digit statistical code | Free |
| 7210.70 | Painted, varnished or coated with plastics | 6-digit heading | |
| 7210.70.30.00 | Not coated or plated with metal and not clad | 10-digit statistical code | Free |
| 7210.70.60 | Other | 8-digit subheading | Free |
| 7210.70.60.30 | Electrolytically coated or plated | 10-digit statistical code | |
| 7210.70.60.60 | Other | 10-digit statistical code | |
| 7210.70.60.90 | Other | 10-digit statistical code | |
| 7210.90 | Other | 6-digit heading | |
| 7210.90.10.00 | Clad | 10-digit statistical code | Free |
| 7210.90.60.00 | Electrolytically coated or plated with base metal | 10-digit statistical code | Free |
| 7210.90.90.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7211.13.00.00 | Universal mill plate | 10-digit statistical code | Free |
| 7211.14.00 | Other, of a thickness of 4.75 mm or more | 8-digit subheading | Free |
| 7211.14.00.30 | Of high-strength steel | 10-digit statistical code | |
| 7211.14.00.45 | Not in coils | 10-digit statistical code | |
| 7211.14.00.90 | Other | 10-digit statistical code | |
| 7211.19 | Other | 6-digit heading | |
| 7211.19.15.00 | Of high-strength steel | 10-digit statistical code | Free |
| 7211.19.20.00 | Of a thickness exceeding 1.25 mm | 10-digit statistical code | Free |
| 7211.19.30.00 | Other | 10-digit statistical code | Free |
| 7211.19.45.00 | Of high-strength steel | 10-digit statistical code | Free |
| 7211.19.60.00 | Pickled | 10-digit statistical code | Free |
| 7211.19.75 | Other | 8-digit subheading | Free |
| 7211.19.75.30 | With untrimmed edges | 10-digit statistical code | |
| 7211.19.75.60 | Other | 10-digit statistical code | |
| 7211.19.75.90 | Other | 10-digit statistical code | |
| 7211.23 | Containing by weight less than 0.25 percent of carbon | 6-digit heading | |
| 7211.23.15.00 | Of high-strength steel | 10-digit statistical code | Free |
| 7211.23.20.00 | Other | 10-digit statistical code | Free |
| 7211.23.30.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | 10-digit statistical code | Free |
| 7211.23.45.00 | Of a thickness not exceeding 0.25 mm | 10-digit statistical code | Free |
| 7211.23.60 | Other | 8-digit subheading | Free |
| 7211.23.60.30 | Of a thickness exceeding 1.25 mm | 10-digit statistical code | |
| 7211.23.60.60 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | 10-digit statistical code | |
| 7211.23.60.90 | Of a thickness not exceeding 0.25 mm | 10-digit statistical code | |
| 7211.29 | Other | 6-digit heading | |
| 7211.29.20 | Of a thickness exceeding 0.25 mm | 8-digit subheading | Free |
| 7211.29.20.30 | Of a width less than 51 mm, in coils | 10-digit statistical code | |
| 7211.29.20.90 | Other | 10-digit statistical code | |
| 7211.29.45.00 | Other | 10-digit statistical code | Free |
| 7211.29.60 | Other | 8-digit subheading | Free |
| 7211.29.60.30 | Of a thickness exceeding 1.25 mm | 10-digit statistical code | |
| 7211.29.60.80 | Other | 10-digit statistical code | |
| 7211.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7212.10.00.00 | Plated or coated with tin | 10-digit statistical code | Free |
| 7212.20.00.00 | Electrolytically plated or coated with zinc | 10-digit statistical code | Free |
| 7212.30 | Otherwise plated or coated with zinc | 6-digit heading | |
| 7212.30.10 | Of a thickness exceeding 0.25 mm or more | 8-digit subheading | Free |
| 7212.30.10.30 | Of a width less than 51 mm, in coils | 10-digit statistical code | |
| 7212.30.10.90 | Other | 10-digit statistical code | |
| 7212.30.30.00 | Other | 10-digit statistical code | Free |
| 7212.30.50.00 | Other | 10-digit statistical code | Free |
| 7212.40 | Painted, varnished or coated with plastics | 6-digit heading | |
| 7212.40.10.00 | Of a width of less than 300 mm | 10-digit statistical code | Free |
| 7212.40.50.00 | Other | 10-digit statistical code | Free |
| 7212.50.00.00 | Otherwise plated or coated | 10-digit statistical code | Free |
| 7212.60.00.00 | Clad | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7213.10.00.00 | Concrete reinforcing bars and rods | 10-digit statistical code | Free |
| 7213.20.00 | Other, of free-cutting steel | 8-digit subheading | Free |
| 7213.20.00.10 | Containing by weight 0.1 percent or more of lead | 10-digit statistical code | |
| 7213.20.00.80 | Other | 10-digit statistical code | |
| 7213.91 | Of circular cross section measuring less than 14 mm in diameter | 6-digit heading | |
| 7213.91.30 | Not tempered, not treated and not partly manufactured | 8-digit subheading | Free |
| 7213.91.30.11 | Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter | 10-digit statistical code | |
| 7213.91.30.15 | Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter | 10-digit statistical code | |
| 7213.91.30.20 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | 10-digit statistical code | |
| 7213.91.30.93 | Other | 10-digit statistical code | |
| 7213.91.45.00 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | Free |
| 7213.91.60.00 | Other | 10-digit statistical code | Free |
| 7213.99.00 | Other | 8-digit subheading | Free |
| 7213.99.00.30 | With a diameter of 14 mm or more but less than 19 mm | 10-digit statistical code | |
| 7213.99.00.60 | With a diameter of 19 mm or more | 10-digit statistical code | |
| 7213.99.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7214.10.00.00 | Forged | 10-digit statistical code | Free |
| 7214.20.00.00 | Concrete reinforcing bars and rods | 10-digit statistical code | Free |
| 7214.30.00 | Other, of free-cutting steel | 8-digit subheading | Free |
| 7214.30.00.10 | Containing by weight 0.1 percent or more of lead | 10-digit statistical code | |
| 7214.30.00.80 | Other | 10-digit statistical code | |
| 7214.91.00 | Of rectangular (other than square) cross-section | 8-digit subheading | Free |
| 7214.91.00.16 | With a maximum cross section less than 152 mm | 10-digit statistical code | |
| 7214.91.00.20 | With a maximum cross section of 152 mm or more | 10-digit statistical code | |
| 7214.91.00.60 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7214.91.00.90 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7214.99.00 | Other | 8-digit subheading | Free |
| 7214.99.00.16 | With a diameter less than 76 mm | 10-digit statistical code | |
| 7214.99.00.21 | With a diameter of 76 mm or more but not exceeding 152 mm | 10-digit statistical code | |
| 7214.99.00.26 | With a diameter exceeding 152 mm | 10-digit statistical code | |
| 7214.99.00.31 | With a diameter less than 76 mm | 10-digit statistical code | |
| 7214.99.00.36 | With a diameter of 76 mm or more but not exceeding 152 mm | 10-digit statistical code | |
| 7214.99.00.40 | With a diameter exceeding 152 mm | 10-digit statistical code | |
| 7214.99.00.45 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7214.99.00.60 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7214.99.00.75 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7214.99.00.90 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7215.10.00 | Of free-cutting steel, not further worked than cold-formed or cold-finished | 8-digit subheading | Free |
| 7215.10.00.10 | Containing by weight 0.1 percent or more of lead | 10-digit statistical code | |
| 7215.10.00.80 | Other | 10-digit statistical code | |
| 7215.50.00 | Other, not further worked than cold-formed or cold-finished | 8-digit subheading | Free |
| 7215.50.00.16 | With a diameter or cross section measuring less than 76 mm | 10-digit statistical code | |
| 7215.50.00.18 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | 10-digit statistical code | |
| 7215.50.00.20 | With a diameter or cross section exceeding 228 mm | 10-digit statistical code | |
| 7215.50.00.61 | With a diameter or cross section measuring less than 76 mm | 10-digit statistical code | |
| 7215.50.00.63 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | 10-digit statistical code | |
| 7215.50.00.65 | With a diameter or cross section exceeding 228 mm | 10-digit statistical code | |
| 7215.50.00.90 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7215.90 | Other | 6-digit heading | |
| 7215.90.10.00 | Not cold-formed | 10-digit statistical code | Free |
| 7215.90.30.00 | Cold-formed | 10-digit statistical code | Free |
| 7215.90.50.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7216.10.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 8-digit subheading | Free |
| 7216.10.00.10 | U sections | 10-digit statistical code | |
| 7216.10.00.50 | Other | 10-digit statistical code | |
| 7216.21.00.00 | L sections | 10-digit statistical code | Free |
| 7216.22.00.00 | T sections | 10-digit statistical code | Free |
| 7216.31.00.00 | U sections | 10-digit statistical code | Free |
| 7216.32.00.00 | I sections (standard beams) | 10-digit statistical code | Free |
| 7216.33.00 | H sections | 8-digit subheading | Free |
| 7216.33.00.30 | Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm | 10-digit statistical code | |
| 7216.33.00.60 | Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm | 10-digit statistical code | |
| 7216.33.00.90 | Other | 10-digit statistical code | |
| 7216.40.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | 8-digit subheading | Free |
| 7216.40.00.10 | L sections | 10-digit statistical code | |
| 7216.40.00.50 | Other | 10-digit statistical code | |
| 7216.50.00.00 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 10-digit statistical code | Free |
| 7216.61.00.00 | Obtained from flat-rolled products | 10-digit statistical code | Free |
| 7216.69.00.00 | Other | 10-digit statistical code | Free |
| 7216.91.00 | Cold-formed or cold-finished from flat-rolled products | 8-digit subheading | Free |
| 7216.91.00.10 | Drilled, notched, punched or cambered | 10-digit statistical code | |
| 7216.91.00.90 | Other | 10-digit statistical code | |
| 7216.99.00 | Other | 8-digit subheading | Free |
| 7216.99.00.10 | Drilled, notched, punched or cambered | 10-digit statistical code | |
| 7216.99.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7217.10 | Not plated or coated, whether or not polished | 6-digit heading | |
| 7217.10.10.00 | Of a thickness not exceeding 0.25 mm | 10-digit statistical code | Free |
| 7217.10.20.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | 10-digit statistical code | Free |
| 7217.10.30.00 | Of a thickness exceeding 1.25 mm | 10-digit statistical code | Free |
| 7217.10.40 | With a diameter of less than 1.5 mm | 8-digit subheading | Free |
| 7217.10.40.40 | In coils weighing not more than 2 kilograms | 10-digit statistical code | |
| 7217.10.40.45 | Other | 10-digit statistical code | |
| 7217.10.40.90 | Other | 10-digit statistical code | |
| 7217.10.50 | With a diameter of 1.5 mm or more | 8-digit subheading | Free |
| 7217.10.50.30 | Heat treated | 10-digit statistical code | |
| 7217.10.50.90 | Other | 10-digit statistical code | |
| 7217.10.60.00 | Other wire | 10-digit statistical code | Free |
| 7217.10.70.00 | Flat wire | 10-digit statistical code | Free |
| 7217.10.80 | Round wire | 8-digit subheading | Free |
| 7217.10.80.10 | Heat treated | 10-digit statistical code | |
| 7217.10.80.20 | Other | 10-digit statistical code | |
| 7217.10.80.25 | With a diameter of less than 1.0 mm | 10-digit statistical code | |
| 7217.10.80.30 | With a diameter of 1.0 mm or more but less than 1.5 mm | 10-digit statistical code | |
| 7217.10.80.45 | With a diameter of 1.5 mm or more | 10-digit statistical code | |
| 7217.10.80.60 | With a diameter of less than 1.0 mm | 10-digit statistical code | |
| 7217.10.80.75 | With a diameter of 1.0 mm or more but less than 1.5 mm | 10-digit statistical code | |
| 7217.10.80.90 | With a diameter of 1.5 mm or more | 10-digit statistical code | |
| 7217.10.90.00 | Other wire | 10-digit statistical code | Free |
| 7217.20 | Plated or coated with zinc | 6-digit heading | |
| 7217.20.15.00 | Flat wire | 10-digit statistical code | Free |
| 7217.20.30.00 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | 10-digit statistical code | Free |
| 7217.20.45 | Other | 8-digit subheading | Free |
| 7217.20.45.10 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7217.20.45.20 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7217.20.45.30 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.20.45.40 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7217.20.45.50 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7217.20.45.60 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.20.45.70 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7217.20.45.80 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.20.60.00 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | Free |
| 7217.20.75.00 | Other | 10-digit statistical code | Free |
| 7217.30 | Plated or coated with other base metals | 6-digit heading | |
| 7217.30.15 | Flat wire | 8-digit subheading | Free |
| 7217.30.15.30 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.30.15.60 | Other | 10-digit statistical code | |
| 7217.30.30.00 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | 10-digit statistical code | Free |
| 7217.30.45 | Other | 8-digit subheading | Free |
| 7217.30.45.04 | Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding | 10-digit statistical code | |
| 7217.30.45.11 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7217.30.45.20 | Containing by weight 0.25 percent or more but less than 0.6 percent or carbon | 10-digit statistical code | |
| 7217.30.45.30 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.30.45.41 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7217.30.45.50 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7217.30.45.60 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code | |
| 7217.30.45.90 | With a diameter of 1.5 mm or more | 10-digit statistical code | |
| 7217.30.60.00 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | Free |
| 7217.30.75.00 | Other | 10-digit statistical code | Free |
| 7217.90 | Other | 6-digit heading | |
| 7217.90.10.00 | Coated with plastics | 10-digit statistical code | Free |
| 7217.90.50 | Other | 8-digit subheading | Free |
| 7217.90.50.30 | Containing by weight less than 0.25 percent of carbon | 10-digit statistical code | |
| 7217.90.50.60 | Containing by weight 0.25 percent or more but less than 0.6 percent of carbon | 10-digit statistical code | |
| 7217.90.50.90 | Containing by weight 0.6 percent or more of carbon | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7218.10.00.00 | Ingots and other primary forms | 10-digit statistical code | Free |
| 7218.91.00 | Of rectangular (other than square) cross-section | 8-digit subheading | Free |
| 7218.91.00.15 | Having a cross-sectional area of less than 232 cm2 | 10-digit statistical code | |
| 7218.91.00.30 | Having a cross-sectional area of 232 cm2 or more | 10-digit statistical code | |
| 7218.91.00.60 | Having a width at least four times the thickness | 10-digit statistical code | |
| 7218.99.00 | Other | 8-digit subheading | Free |
| 7218.99.00.15 | Having a cross-sectional area of less than 232 cm2 | 10-digit statistical code | |
| 7218.99.00.30 | Having a cross-sectional area of 232 cm2 or more | 10-digit statistical code | |
| 7218.99.00.45 | Having a cross-sectional area of less than 232 cm2 | 10-digit statistical code | |
| 7218.99.00.60 | Having a cross-sectional area of 232 cm2 or more | 10-digit statistical code | |
| 7218.99.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7219.11.00 | Of a thickness exceeding 10 mm | 8-digit subheading | Free |
| 7219.11.00.30 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.11.00.60 | Of a width exceeding 1575 mm | 10-digit statistical code | |
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 8-digit subheading | Free |
| 7219.12.00.02 | Not annealed or not pickled | 10-digit statistical code | |
| 7219.12.00.06 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.12.00.21 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.12.00.26 | Of a width exceeding 1575 mm | 10-digit statistical code | |
| 7219.12.00.51 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.12.00.56 | Of a width exceeding 1575 mm | 10-digit statistical code | |
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.12.00.71 | Other | 10-digit statistical code | |
| 7219.12.00.81 | Other | 10-digit statistical code | |
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 8-digit subheading | Free |
| 7219.13.00.02 | Not annealed or not pickled | 10-digit statistical code | |
| 7219.13.00.31 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.13.00.71 | Other | 10-digit statistical code | |
| 7219.13.00.81 | Other | 10-digit statistical code | |
| 7219.14.00 | Of a thickness of less than 3 mm | 8-digit subheading | Free |
| 7219.14.00.30 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.14.00.65 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.14.00.90 | Other | 10-digit statistical code | |
| 7219.21.00 | Of a thickness exceeding 10 mm | 8-digit subheading | Free |
| 7219.21.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.21.00.20 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.21.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | 10-digit statistical code | |
| 7219.21.00.60 | Of a width exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 8-digit subheading | Free |
| 7219.22.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.22.00.15 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.22.00.20 | Of a width exceeding 1575 mm but not exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00.25 | Of a width exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00.35 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.22.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00.45 | Of a width exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00.70 | Of a width not exceeding 1575 mm | 10-digit statistical code | |
| 7219.22.00.75 | Of a width exceeding 1575 mm but not exceeding 1880 mm | 10-digit statistical code | |
| 7219.22.00.80 | Of a width exceeding 1880 mm | 10-digit statistical code | |
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 8-digit subheading | Free |
| 7219.23.00.30 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.23.00.60 | Other | 10-digit statistical code | |
| 7219.24.00 | Of a thickness of less than 3 mm | 8-digit subheading | Free |
| 7219.24.00.30 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.24.00.60 | Other | 10-digit statistical code | |
| 7219.31.00 | Of a thickness of 4.75 mm or more | 8-digit subheading | Free |
| 7219.31.00.10 | In coils | 10-digit statistical code | |
| 7219.31.00.50 | Not in coils | 10-digit statistical code | |
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | 8-digit subheading | Free |
| 7219.32.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel | 10-digit statistical code | |
| 7219.32.00.25 | Other | 10-digit statistical code | |
| 7219.32.00.35 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.32.00.38 | Other | 10-digit statistical code | |
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7219.32.00.44 | Other | 10-digit statistical code | |
| 7219.32.00.45 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.32.00.60 | Other | 10-digit statistical code | |
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | 8-digit subheading | Free |
| 7219.33.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | 10-digit statistical code | |
| 7219.33.00.25 | Other | 10-digit statistical code | |
| 7219.33.00.35 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.33.00.38 | Other | 10-digit statistical code | |
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7219.33.00.44 | Other | 10-digit statistical code | |
| 7219.33.00.45 | Of a width of 1370 mm or more | 10-digit statistical code | |
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7219.33.00.80 | Other | 10-digit statistical code | |
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 8-digit subheading | Free |
| 7219.34.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.34.00.25 | Other | 10-digit statistical code | |
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7219.34.00.35 | Other | 10-digit statistical code | |
| 7219.34.00.50 | Not in coils | 10-digit statistical code | |
| 7219.35.00 | Of a thickness of less than 0.5 mm | 8-digit subheading | Free |
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.35.00.15 | Other | 10-digit statistical code | |
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7219.35.00.35 | Other | 10-digit statistical code | |
| 7219.35.00.50 | Not in coils | 10-digit statistical code | |
| 7219.90.00 | Other | 8-digit subheading | Free |
| 7219.90.00.10 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7219.90.00.25 | Other | 10-digit statistical code | |
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7219.90.00.80 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7220.11.00.00 | Of a thickness of 4.75 mm or more | 10-digit statistical code | Free |
| 7220.12 | Of a thickness of less than 4.75 mm | 6-digit heading | |
| 7220.12.10.00 | Of a width of 300 mm or more | 10-digit statistical code | Free |
| 7220.12.50.00 | Of a width of less than 300 mm | 10-digit statistical code | Free |
| 7220.20 | Not further worked than cold-rolled (cold-reduced) | 6-digit heading | |
| 7220.20.10 | Of a width of 300 mm or more | 8-digit subheading | Free |
| 7220.20.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7220.20.10.15 | Other | 10-digit statistical code | |
| 7220.20.10.60 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7220.20.10.80 | Other | 10-digit statistical code | |
| 7220.20.60 | Of a thickness exceeding 1.25 mm | 8-digit subheading | Free |
| 7220.20.60.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7220.20.60.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7220.20.60.15 | Other | 10-digit statistical code | |
| 7220.20.60.60 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7220.20.60.80 | Other | 10-digit statistical code | |
| 7220.20.70 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | 8-digit subheading | Free |
| 7220.20.70.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7220.20.70.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7220.20.70.15 | Other | 10-digit statistical code | |
| 7220.20.70.60 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7220.20.70.80 | Other | 10-digit statistical code | |
| 7220.20.80.00 | Razor blade steel | 10-digit statistical code | Free |
| 7220.20.90 | Other | 8-digit subheading | Free |
| 7220.20.90.30 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7220.20.90.60 | Other | 10-digit statistical code | |
| 7220.90.00 | Other | 8-digit subheading | Free |
| 7220.90.00.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7220.90.00.15 | Other | 10-digit statistical code | |
| 7220.90.00.60 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7220.90.00.80 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7221.00.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7221.00.00.17 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7221.00.00.18 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7221.00.00.30 | With a diameter of 14 mm or more but less than 19 mm | 10-digit statistical code | |
| 7221.00.00.45 | With a diameter of 19 mm or more | 10-digit statistical code | |
| 7221.00.00.75 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7222.11.00 | Of circular cross-section | 8-digit subheading | Free |
| 7222.11.00.01 | Electroslag or vacuum arc remelted | 10-digit statistical code | |
| 7222.11.00.06 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7222.11.00.57 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.11.00.59 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.11.00.82 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.11.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.19.00 | Other | 8-digit subheading | Free |
| 7222.19.00.01 | Electroslag or vacuum arc remelted | 10-digit statistical code | |
| 7222.19.00.06 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7222.19.00.52 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.19.00.54 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00 | Bars and rods, not further worked than cold-formed or cold-finished | 8-digit subheading | Free |
| 7222.20.00.01 | Electroslag or vacuum arc remelted | 10-digit statistical code | |
| 7222.20.00.06 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7222.20.00.41 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.43 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.62 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.64 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.67 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.69 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.71 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.20.00.73 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.30.00 | Other bars and rods | 8-digit subheading | Free |
| 7222.30.00.01 | Electroslag or vacuum arc remelted | 10-digit statistical code | |
| 7222.30.00.12 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7222.30.00.22 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.30.00.24 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.30.00.82 | Containing less than 8 percent by weight of nickel | 10-digit statistical code | |
| 7222.30.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7222.40 | Angles, shapes and sections | 6-digit heading | |
| 7222.40.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | 8-digit subheading | Free |
| 7222.40.30.25 | Angles | 10-digit statistical code | |
| 7222.40.30.45 | Other | 10-digit statistical code | |
| 7222.40.30.65 | Angles | 10-digit statistical code | |
| 7222.40.30.85 | Other | 10-digit statistical code | |
| 7222.40.60.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7223.00.10 | Round wire | 8-digit subheading | Free |
| 7223.00.10.05 | Spring round wire of a kind described in statistical note 8 to this chapter | 10-digit statistical code | |
| 7223.00.10.16 | With a diameter of less than 0.25 mm | 10-digit statistical code | |
| 7223.00.10.31 | With a diameter of 0.25 mm or more but less than 0.76 mm | 10-digit statistical code | |
| 7223.00.10.46 | With a diameter of 0.76 mm or more but less than 1.52 mm | 10-digit statistical code | |
| 7223.00.10.61 | With a diameter of 1.52 mm or more but less than 5.1 mm | 10-digit statistical code | |
| 7223.00.10.76 | With a diameter of 5.1 mm or more | 10-digit statistical code | |
| 7223.00.50.00 | Flat wire | 10-digit statistical code | Free |
| 7223.00.90.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7224.10.00 | Ingots and other primary forms | 8-digit subheading | Free |
| 7224.10.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7224.10.00.45 | Of tool steel | 10-digit statistical code | |
| 7224.10.00.75 | Other | 10-digit statistical code | |
| 7224.90.00 | Other | 8-digit subheading | Free |
| 7224.90.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7224.90.00.15 | Having a width less than four times the thickness | 10-digit statistical code | |
| 7224.90.00.25 | Having a width at least four times the thickness | 10-digit statistical code | |
| 7224.90.00.35 | Other | 10-digit statistical code | |
| 7224.90.00.45 | Having a width less than four times the thickness | 10-digit statistical code | |
| 7224.90.00.55 | Having a width at least four times the thickness | 10-digit statistical code | |
| 7224.90.00.65 | Of circular cross section | 10-digit statistical code | |
| 7224.90.00.75 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7225.11.00.00 | Grain-oriented | 10-digit statistical code | Free |
| 7225.19.00.00 | Other | 10-digit statistical code | Free |
| 7225.30 | Other, not further worked than hot-rolled, in coils | 6-digit heading | |
| 7225.30.11 | Of tool steel | 8-digit subheading | Free |
| 7225.30.11.10 | Of high-speed steel | 10-digit statistical code | |
| 7225.30.11.80 | Other | 10-digit statistical code | |
| 7225.30.30 | Other | 8-digit subheading | Free |
| 7225.30.30.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7225.30.30.50 | Other | 10-digit statistical code | |
| 7225.30.51 | Of tool steel | 8-digit subheading | Free |
| 7225.30.51.10 | Of high-speed steel | 10-digit statistical code | |
| 7225.30.51.80 | Other | 10-digit statistical code | |
| 7225.30.70.00 | Other | 10-digit statistical code | Free |
| 7225.40 | Other, not further worked than hot-rolled, not in coils | 6-digit heading | |
| 7225.40.11 | Of tool steel | 8-digit subheading | Free |
| 7225.40.11.10 | Of high-speed steel | 10-digit statistical code | |
| 7225.40.11.80 | Other | 10-digit statistical code | |
| 7225.40.30 | Other | 8-digit subheading | Free |
| 7225.40.30.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7225.40.30.50 | Other | 10-digit statistical code | |
| 7225.40.51 | Of tool steel | 8-digit subheading | Free |
| 7225.40.51.10 | Of high-speed steel | 10-digit statistical code | |
| 7225.40.51.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7225.40.51.60 | Other | 10-digit statistical code | |
| 7225.40.70.00 | Other | 10-digit statistical code | Free |
| 7225.50 | Other, not further worked than cold-rolled (cold-reduced) | 6-digit heading | |
| 7225.50.11 | Of tool steel | 8-digit subheading | Free |
| 7225.50.11.10 | Of high-speed steel | 10-digit statistical code | |
| 7225.50.11.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7225.50.11.60 | Other | 10-digit statistical code | |
| 7225.50.60.00 | Of a thickness of 4.75 mm or more | 10-digit statistical code | Free |
| 7225.50.70.00 | Heat-resisting steel | 10-digit statistical code | Free |
| 7225.50.80 | Other | 8-digit subheading | Free |
| 7225.50.80.10 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7225.50.80.80 | Other | 10-digit statistical code | |
| 7225.91.00.00 | Electrolytically plated or coated with zinc | 10-digit statistical code | Free |
| 7225.92.00.00 | Otherwise plated or coated with zinc | 10-digit statistical code | Free |
| 7225.99.00 | Other | 8-digit subheading | Free |
| 7225.99.00.10 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7225.99.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7226.11 | Grain-oriented | 6-digit heading | |
| 7226.11.10.00 | Of a width of 300 mm or more | 10-digit statistical code | Free |
| 7226.11.90 | Of a width of less than 300 mm | 8-digit subheading | Free |
| 7226.11.90.30 | Of thickness not exceeding 0.25 mm | 10-digit statistical code | |
| 7226.11.90.60 | Other | 10-digit statistical code | |
| 7226.19 | Other | 6-digit heading | |
| 7226.19.10.00 | Of a width of 300 mm or more | 10-digit statistical code | Free |
| 7226.19.90.00 | Of a width of less than 300 mm | 10-digit statistical code | Free |
| 7226.20.00.00 | Of high-speed steel | 10-digit statistical code | Free |
| 7226.91 | Not further worked than hot-rolled | 6-digit heading | |
| 7226.91.05.00 | Of chipper knife steel | 10-digit statistical code | Free |
| 7226.91.15 | Of a width of 300 mm or more | 8-digit subheading | Free |
| 7226.91.15.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7226.91.15.60 | Other | 10-digit statistical code | |
| 7226.91.25 | Of a width of less than 300 mm | 8-digit subheading | Free |
| 7226.91.25.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7226.91.25.60 | Other | 10-digit statistical code | |
| 7226.91.50.00 | Of a thickness of 4.75 mm or more | 10-digit statistical code | Free |
| 7226.91.70.00 | Of a width of 300 mm or more | 10-digit statistical code | Free |
| 7226.91.80.00 | Of a width of less than 300 mm | 10-digit statistical code | Free |
| 7226.92 | Not further worked than cold-rolled (cold-reduced) | 6-digit heading | |
| 7226.92.10 | Of a width of 300 mm or more | 8-digit subheading | Free |
| 7226.92.10.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7226.92.10.60 | Other | 10-digit statistical code | |
| 7226.92.30 | Of a width of less than 300 mm | 8-digit subheading | Free |
| 7226.92.30.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7226.92.30.60 | Other | 10-digit statistical code | |
| 7226.92.50.00 | Of a width of 300 mm or more | 10-digit statistical code | Free |
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | 8-digit subheading | Free |
| 7226.92.70.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7226.92.70.50 | Other | 10-digit statistical code | |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | 8-digit subheading | Free |
| 7226.92.80.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7226.92.80.50 | Other | 10-digit statistical code | |
| 7226.99.01 | Other | 8-digit subheading | Free |
| 7226.99.01.10 | Electrolytically plated or coated with zinc | 10-digit statistical code | |
| 7226.99.01.30 | Otherwise plated or coated with zinc | 10-digit statistical code | |
| 7226.99.01.80 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7227.10.00.00 | Of high-speed steel | 10-digit statistical code | Free |
| 7227.20.00 | Of silico-manganese steel | 8-digit subheading | Free |
| 7227.20.00.30 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | 10-digit statistical code | |
| 7227.20.00.80 | Other | 10-digit statistical code | |
| 7227.90 | Other | 6-digit heading | |
| 7227.90.10 | Not tempered, not treated, and not partly manufactured | 8-digit subheading | Free |
| 7227.90.10.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7227.90.10.60 | Other | 10-digit statistical code | |
| 7227.90.20 | Other | 8-digit subheading | Free |
| 7227.90.20.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7227.90.20.60 | Other | 10-digit statistical code | |
| 7227.90.60 | Other | 8-digit subheading | Free |
| 7227.90.60.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7227.90.60.10 | Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter | 10-digit statistical code | |
| 7227.90.60.20 | Of welding quality wire rods of a kind described in statistical note 7 to this chapter | 10-digit statistical code | |
| 7227.90.60.30 | With a diameter of less than 14 mm | 10-digit statistical code | |
| 7227.90.60.35 | With a diameter of 14 mm or more but less than 19 mm | 10-digit statistical code | |
| 7227.90.60.40 | With a diameter of 19 mm or more | 10-digit statistical code | |
| 7227.90.60.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7228.10.00 | Bars and rods, of high-speed steel | 8-digit subheading | Free |
| 7228.10.00.10 | Not cold-formed | 10-digit statistical code | |
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm | 10-digit statistical code | |
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more | 10-digit statistical code | |
| 7228.20 | Bars and rods, of silico-manganese steel | 6-digit heading | |
| 7228.20.10.00 | Not cold-formed | 10-digit statistical code | Free |
| 7228.20.50.00 | Cold-formed | 10-digit statistical code | Free |
| 7228.30 | Of tool steel (other than high-speed steel) | 6-digit heading | |
| 7228.30.20.00 | Of ball-bearing steel | 10-digit statistical code | Free |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | 10-digit statistical code | Free |
| 7228.30.60.00 | Other | 10-digit statistical code | Free |
| 7228.30.80 | Other | 8-digit subheading | Free |
| 7228.30.80.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7228.30.80.10 | Concrete reinforcing bars and rods | 10-digit statistical code | |
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | 10-digit statistical code | |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | 10-digit statistical code | |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | 10-digit statistical code | |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | 10-digit statistical code | |
| 7228.40.00.00 | Other bars and rods, not further worked than forged | 10-digit statistical code | Free |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished | 6-digit heading | |
| 7228.50.10 | Of tool steel (other than high-speed steel) | 8-digit subheading | Free |
| 7228.50.10.10 | Of ball-bearing steel | 10-digit statistical code | |
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | 10-digit statistical code | |
| 7228.50.10.40 | Other | 10-digit statistical code | |
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | 10-digit statistical code | |
| 7228.50.10.80 | Other | 10-digit statistical code | |
| 7228.50.50 | Other | 8-digit subheading | Free |
| 7228.50.50.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | 10-digit statistical code | |
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | 10-digit statistical code | |
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | 10-digit statistical code | |
| 7228.60 | Other bars and rods | 6-digit heading | |
| 7228.60.10 | Of tool steel (other than high-speed steel) | 8-digit subheading | Free |
| 7228.60.10.30 | Of ball-bearing steel | 10-digit statistical code | |
| 7228.60.10.60 | Other | 10-digit statistical code | |
| 7228.60.60.00 | Not cold-formed | 10-digit statistical code | Free |
| 7228.60.80.00 | Cold-formed | 10-digit statistical code | Free |
| 7228.70 | Angles, shapes and sections | 6-digit heading | |
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | 8-digit subheading | Free |
| 7228.70.30.10 | U, I, H and T sections | 10-digit statistical code | |
| 7228.70.30.20 | Angles | 10-digit statistical code | |
| 7228.70.30.41 | Other | 10-digit statistical code | |
| 7228.70.30.60 | Angles | 10-digit statistical code | |
| 7228.70.30.81 | Other | 10-digit statistical code | |
| 7228.70.60.00 | Other | 10-digit statistical code | Free |
| 7228.80.00.00 | Hollow drill bars and rods | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7229.20.00 | Of silico-manganese steel | 8-digit subheading | Free |
| 7229.20.00.10 | Plated or coated with copper | 10-digit statistical code | |
| 7229.20.00.15 | Other | 10-digit statistical code | |
| 7229.20.00.90 | Other | 10-digit statistical code | |
| 7229.90 | Other | 6-digit heading | |
| 7229.90.05.00 | Of high-speed steel | 10-digit statistical code | Free |
| 7229.90.10.00 | Flat wire | 10-digit statistical code | Free |
| 7229.90.50 | Round wire | 8-digit subheading | Free |
| 7229.90.50.06 | Plated or coated with copper | 10-digit statistical code | |
| 7229.90.50.08 | Other | 10-digit statistical code | |
| 7229.90.50.16 | With a diameter of less than 1.0 mm | 10-digit statistical code | |
| 7229.90.50.31 | With a diameter of 1.0 mm or more but less than 1.5 mm | 10-digit statistical code | |
| 7229.90.50.51 | With a diameter of 1.5 mm or more | 10-digit statistical code | |
| 7229.90.90.00 | Other wire | 10-digit statistical code | Free |
Not sure which line applies?
Classification follows the General Rules of Interpretation: the most specific description wins, and you must use a 10-digit statistical code on the entry. When two lines look equally plausible, a CBP binding ruling is the only way to be certain.
Source: USITC Harmonized Tariff Schedule, 2026 Basic Edition, Revision 16. Rate text is reproduced verbatim from the official export; category paths and duty estimates are derived.
Data loaded August 18, 2026.Check this chapter on hts.usitc.govReport an errorHow this data is built