7228
4-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
This is a 4-digit heading — a category, not a filing code. Pick the more specific code beneath it that best matches your goods; only a 10-digit statistical code can be used on a customs entry.
Duty rates
No rate is published at this level — check the specific 10-digit statistical code beneath it.
| Rate | Value and what it means |
|---|---|
| General rate (Column 1) | See 10-digit codeColumn 1 general Applies to most trading partners — the standard "normal trade relations" rate. |
| Special rate (Column 1) | —Trade programs The country letters in parentheses are free trade agreement and preference programs. If your goods qualify under one of them, that rate replaces the general rate. |
| Column 2 rate | —Non-NTR Reserved for the small group of countries that do not have normal trade relations with the US (currently Cuba, North Korea, Russia and Belarus). Almost no importer uses this column — if you are shipping from anywhere else, ignore it. |
| Unit of quantity | — How CBP expects the quantity to be reported on the entry summary. |
Codes within Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
46 more specific lines fall under 7228.
- 7228.10.00Bars and rods, of high-speed steel8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:Free
- 7228.10.00.10Not cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Bars and rods, of high-speed steel
- 7228.10.00.30With a maximum cross-sectional dimension of less than 18 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Bars and rods, of high-speed steel > Cold-formed:
- 7228.10.00.60With a maximum cross-sectional dimension of 18 mm or more10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Bars and rods, of high-speed steel > Cold-formed:
- 7228.20Bars and rods, of silico-manganese steel6-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
- 7228.20.10.00Not cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Bars and rods, of silico-manganese steel:Free
- 7228.20.50.00Cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Bars and rods, of silico-manganese steel:Free
- 7228.30Of tool steel (other than high-speed steel)6-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
- 7228.30.20.00Of ball-bearing steel10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Of tool steel (other than high-speed steel):Free
- 7228.30.40.00Of chipper knife steel, not cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Of tool steel (other than high-speed steel):Free
- 7228.30.60.00Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Of tool steel (other than high-speed steel):Free
- 7228.30.80Other8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:Free
- 7228.30.80.05Of high-nickel alloy steel10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other
- 7228.30.80.10Concrete reinforcing bars and rods10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other
- 7228.30.80.15With a diameter or cross section measuring less than 76 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other > Other:
- 7228.30.80.41With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other > Other:
- 7228.30.80.45With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other > Other:
- 7228.30.80.70With a diameter or cross section exceeding 228 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other > Other:
- 7228.40.00.00Other bars and rods, not further worked than forged10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:Free
- 7228.50Other bars and rods, not further worked than cold-formed or cold-finished6-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
- 7228.50.10Of tool steel (other than high-speed steel)8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished:Free
- 7228.50.10.10Of ball-bearing steel10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Of tool steel (other than high-speed steel)
- 7228.50.10.20Of round or rectangular cross section with surfaces ground, milled or polished10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Of tool steel (other than high-speed steel) > Other: > With a maximum cross-sectional dimension of less than 18 mm:
- 7228.50.10.40Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Of tool steel (other than high-speed steel) > Other: > With a maximum cross-sectional dimension of less than 18 mm:
- 7228.50.10.60Of round or rectangular cross section with surfaces ground, milled or polished10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Of tool steel (other than high-speed steel) > Other: > With a maximum cross-sectional dimension of 18 mm or more:
- 7228.50.10.80Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Of tool steel (other than high-speed steel) > Other: > With a maximum cross-sectional dimension of 18 mm or more:
- 7228.50.50Other8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished:Free
- 7228.50.50.05Of high-nickel alloy steel10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Other
- 7228.50.50.15With a diameter or cross section measuring less than 76 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Other > Other:
- 7228.50.50.40With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Other > Other:
- 7228.50.50.70With a diameter or cross section exceeding 228 mm10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods, not further worked than cold-formed or cold-finished: > Other > Other:
- 7228.60Other bars and rods6-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
- 7228.60.10Of tool steel (other than high-speed steel)8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods:Free
- 7228.60.10.30Of ball-bearing steel10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods: > Of tool steel (other than high-speed steel)
- 7228.60.10.60Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods: > Of tool steel (other than high-speed steel)
- 7228.60.60.00Not cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods: > Other:Free
- 7228.60.80.00Cold-formed10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Other bars and rods: > Other:Free
- 7228.70Angles, shapes and sections6-digit headingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
- 7228.70.30Hot-rolled, not drilled, not punched and not otherwise advanced8-digit subheadingOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections:Free
- 7228.70.30.10U, I, H and T sections10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced
- 7228.70.30.20Angles10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced > Other: > With a maximum cross-sectional dimension of 76 mm or more:
- 7228.70.30.41Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced > Other: > With a maximum cross-sectional dimension of 76 mm or more:
- 7228.70.30.60Angles10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced > Other: > With a maximum cross-sectional dimension of less than 76 mm:
- 7228.70.30.81Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections: > Hot-rolled, not drilled, not punched and not otherwise advanced > Other: > With a maximum cross-sectional dimension of less than 76 mm:
- 7228.70.60.00Other10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: > Angles, shapes and sections:Free
- 7228.80.00.00Hollow drill bars and rods10-digit statistical codeOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:Free
Chapter 72: Iron and Steel
Browse every code in this chapter to compare neighbouring classifications.
View Chapter 72Source: USITC Harmonized Tariff Schedule, 2026 Basic Edition, Revision 16. Rate text is reproduced verbatim from the official export; category paths and duty estimates are derived.
Data loaded August 18, 2026.Check this chapter on hts.usitc.govReport an error with this codeHow this data is built