7220
4-digit headingFlat-rolled products of stainless steel, of a width of less than 600 mm
This is a 4-digit heading — a category, not a filing code. Pick the more specific code beneath it that best matches your goods; only a 10-digit statistical code can be used on a customs entry.
Duty rates
No rate is published at this level — check the specific 10-digit statistical code beneath it.
| Rate | Value and what it means |
|---|---|
| General rate (Column 1) | See 10-digit codeColumn 1 general Applies to most trading partners — the standard "normal trade relations" rate. |
| Special rate (Column 1) | —Trade programs The country letters in parentheses are free trade agreement and preference programs. If your goods qualify under one of them, that rate replaces the general rate. |
| Column 2 rate | —Non-NTR Reserved for the small group of countries that do not have normal trade relations with the US (currently Cuba, North Korea, Russia and Belarus). Almost no importer uses this column — if you are shipping from anywhere else, ignore it. |
| Unit of quantity | — How CBP expects the quantity to be reported on the entry summary. |
Codes within Flat-rolled products of stainless steel, of a width of less than 600 mm
31 more specific lines fall under 7220.
- 7220.11.00.00Of a thickness of 4.75 mm or more10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than hot-rolled:Free
- 7220.12Of a thickness of less than 4.75 mm6-digit headingFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than hot-rolled:
- 7220.12.10.00Of a width of 300 mm or more10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than hot-rolled: > Of a thickness of less than 4.75 mm:Free
- 7220.12.50.00Of a width of less than 300 mm10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than hot-rolled: > Of a thickness of less than 4.75 mm:Free
- 7220.20Not further worked than cold-rolled (cold-reduced)6-digit headingFlat-rolled products of stainless steel, of a width of less than 600 mm:
- 7220.20.10Of a width of 300 mm or more8-digit subheadingFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced):Free
- 7220.20.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenum10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of 300 mm or more > Containing more than 0.5 percent but less than 24 percent by weight of nickel:
- 7220.20.10.15Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of 300 mm or more > Containing more than 0.5 percent but less than 24 percent by weight of nickel:
- 7220.20.10.60Containing less than 15 percent by weight of chromium10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of 300 mm or more > Other:
- 7220.20.10.80Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of 300 mm or more > Other:
- 7220.20.60Of a thickness exceeding 1.25 mm8-digit subheadingFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm:Free
- 7220.20.60.05Of high-nickel alloy steel10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm
- 7220.20.60.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenum10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Containing more than 0.5 percent by weight of nickel:
- 7220.20.60.15Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Containing more than 0.5 percent by weight of nickel:
- 7220.20.60.60Containing less than 15 percent by weight of chromium10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Other:
- 7220.20.60.80Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Other:
- 7220.20.70Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm8-digit subheadingFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm:Free
- 7220.20.70.05Of high-nickel alloy steel10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
- 7220.20.70.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenum10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm > Other: > Containing more than 0.5 percent by weight of nickel:
- 7220.20.70.15Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm > Other: > Containing more than 0.5 percent by weight of nickel:
- 7220.20.70.60Containing less than 15 percent by weight of chromium10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm > Other: > Other:
- 7220.20.70.80Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm > Other: > Other:
- 7220.20.80.00Razor blade steel10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness not exceeding 0.25 mm:Free
- 7220.20.90Other8-digit subheadingFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness not exceeding 0.25 mm:Free
- 7220.20.90.30Containing more than 0.5 percent but less than 24 percent by weight of nickel10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness not exceeding 0.25 mm: > Other
- 7220.20.90.60Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness not exceeding 0.25 mm: > Other
- 7220.90.00Other8-digit subheadingFlat-rolled products of stainless steel, of a width of less than 600 mm:Free
- 7220.90.00.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenum10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Other > Containing more than 0.5 percent but less than 24 percent by weight of nickel:
- 7220.90.00.15Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Other > Containing more than 0.5 percent but less than 24 percent by weight of nickel:
- 7220.90.00.60Containing less than 15 percent by weight of chromium10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Other > Other:
- 7220.90.00.80Other10-digit statistical codeFlat-rolled products of stainless steel, of a width of less than 600 mm: > Other > Other:
Chapter 72: Iron and Steel
Browse every code in this chapter to compare neighbouring classifications.
View Chapter 72Source: USITC Harmonized Tariff Schedule, 2026 Basic Edition, Revision 16. Rate text is reproduced verbatim from the official export; category paths and duty estimates are derived.
Data loaded August 18, 2026.Check this chapter on hts.usitc.govReport an error with this codeHow this data is built