7208
4-digit headingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
This is a 4-digit heading — a category, not a filing code. Pick the more specific code beneath it that best matches your goods; only a 10-digit statistical code can be used on a customs entry.
Duty rates
No rate is published at this level — check the specific 10-digit statistical code beneath it.
| Rate | Value and what it means |
|---|---|
| General rate (Column 1) | See 10-digit codeColumn 1 general Applies to most trading partners — the standard "normal trade relations" rate. |
| Special rate (Column 1) | —Trade programs The country letters in parentheses are free trade agreement and preference programs. If your goods qualify under one of them, that rate replaces the general rate. |
| Column 2 rate | —Non-NTR Reserved for the small group of countries that do not have normal trade relations with the US (currently Cuba, North Korea, Russia and Belarus). Almost no importer uses this column — if you are shipping from anywhere else, ignore it. |
| Unit of quantity | — How CBP expects the quantity to be reported on the entry summary. |
Codes within Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
44 more specific lines fall under 7208.
- 7208.10In coils, not further worked than hot-rolled, with patterns in relief6-digit headingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
- 7208.10.15.00Pickled10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > In coils, not further worked than hot-rolled, with patterns in relief:Free
- 7208.10.30.00Of a thickness of 4.75 mm or more10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > In coils, not further worked than hot-rolled, with patterns in relief: > Other:Free
- 7208.10.60.00Of a thickness of less than 4.75 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > In coils, not further worked than hot-rolled, with patterns in relief: > Other:Free
- 7208.25Of a thickness of 4.75 mm or more6-digit headingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled:
- 7208.25.30.00Of high-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of 4.75 mm or more:Free
- 7208.25.60.00Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of 4.75 mm or more:Free
- 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled:Free
- 7208.26.00.30High-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.26.00.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.00Of a thickness of less than 3 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled:Free
- 7208.27.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of less than 3 mm > High-strength steel:
- 7208.27.00.45Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of less than 3 mm > High-strength steel:
- 7208.27.00.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled, pickled: > Of a thickness of less than 3 mm
- 7208.36.00Of a thickness exceeding 10 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled:Free
- 7208.36.00.30High-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm
- 7208.36.00.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm
- 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled:Free
- 7208.37.00.30High-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.37.00.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled:Free
- 7208.38.00.15High-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.38.00.30With untrimmed edges10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of 3 mm or more but less than 4.75 mm > Other:
- 7208.38.00.90Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of 3 mm or more but less than 4.75 mm > Other:
- 7208.39.00Of a thickness of less than 3 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled:Free
- 7208.39.00.20“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of less than 3 mm > High-strength steel:
- 7208.39.00.25Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of less than 3 mm > High-strength steel:
- 7208.39.00.30With untrimmed edges10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of less than 3 mm > Other:
- 7208.39.00.90Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, in coils, not further worked than hot-rolled: > Of a thickness of less than 3 mm > Other:
- 7208.40Not in coils, not further worked than hot-rolled, with patterns in relief6-digit headingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
- 7208.40.30Of a thickness of 4.75 mm or more8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief:Free
- 7208.40.30.30Of a thickness exceeding 10 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief: > Of a thickness of 4.75 mm or more
- 7208.40.30.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief: > Of a thickness of 4.75 mm or more
- 7208.40.60Of a thickness of less than 4.75 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief:Free
- 7208.40.60.30Of a thickness less than 3 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief: > Of a thickness of less than 4.75 mm
- 7208.40.60.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Not in coils, not further worked than hot-rolled, with patterns in relief: > Of a thickness of less than 4.75 mm
- 7208.51.00Of a thickness exceeding 10 mm8-digit subheadingFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled:Free
- 7208.51.00.30Universal mill plate10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm
- 7208.51.00.45Of high-strength steel10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm > Other:
- 7208.51.00.60Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm > Other:
- 7208.52.00.00Of a thickness of 4.75 mm or more but not exceeding 10 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled:Free
- 7208.53.00.00Of a thickness of 3 mm or more but less than 4.75 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled:Free
- 7208.54.00.00Of a thickness of less than 3 mm10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: > Other, not in coils, not further worked than hot-rolled:Free
- 7208.90.00.00Other10-digit statistical codeFlat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:Free
Chapter 72: Iron and Steel
Browse every code in this chapter to compare neighbouring classifications.
View Chapter 72Source: USITC Harmonized Tariff Schedule, 2026 Basic Edition, Revision 16. Rate text is reproduced verbatim from the official export; category paths and duty estimates are derived.
Data loaded August 18, 2026.Check this chapter on hts.usitc.govReport an error with this codeHow this data is built