Chapter 73
Articles of Iron or Steel
759 tariff lines · 573 filing-ready 10-digit codes · codes begin with 73
Chapter 73 of the US Harmonized Tariff Schedule covers articles of Iron or Steel. Every code in this chapter starts with the digits 73. Work down the nested list below: the bold headings are broad categories, and the 10-digit statistical codes underneath them are what you actually declare to US Customs. Duty rates shown are the general (Column 1) rates that apply to most trading partners.
Codes in Chapter 73
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7301.10.00.00 | Sheet piling | 10-digit statistical code | Free |
| 7301.20 | Angles, shapes and sections | 6-digit heading | |
| 7301.20.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7301.20.50.00 | Of alloy steel | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7302.10 | Rails | 6-digit heading | |
| 7302.10.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7302.10.10.10 | Standard tee rails over 30 kg per meter | 10-digit statistical code | |
| 7302.10.10.15 | Over 30 kg per meter | 10-digit statistical code | |
| 7302.10.10.25 | Other | 10-digit statistical code | |
| 7302.10.10.35 | Standard tee rails over 30 kg per meter | 10-digit statistical code | |
| 7302.10.10.45 | Over 30 kg per meter | 10-digit statistical code | |
| 7302.10.10.55 | Other | 10-digit statistical code | |
| 7302.10.10.65 | Railway rails for rerolling | 10-digit statistical code | |
| 7302.10.10.75 | Other | 10-digit statistical code | |
| 7302.10.50 | Of alloy steel | 8-digit subheading | Free |
| 7302.10.50.20 | New | 10-digit statistical code | |
| 7302.10.50.40 | Railway rails for rerolling | 10-digit statistical code | |
| 7302.10.50.60 | Other | 10-digit statistical code | |
| 7302.30.00.00 | Switch blades, crossing frogs, point rods and other crossing pieces | 10-digit statistical code | Free |
| 7302.40.00.00 | Fish-plates and sole plates | 10-digit statistical code | Free |
| 7302.90 | Other | 6-digit heading | |
| 7302.90.10.00 | Sleepers (cross-ties) | 10-digit statistical code | Free |
| 7302.90.90.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7303.00.00.30 | Soil pipe | 10-digit statistical code | |
| 7303.00.00.60 | Pressure pipe with an inside diameter of less than 356 mm | 10-digit statistical code | |
| 7303.00.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7304.11.00 | Of stainless steel | 8-digit subheading | Free |
| 7304.11.00.20 | Having an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7304.11.00.50 | Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.11.00.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.19 | Other | 6-digit heading | |
| 7304.19.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7304.19.10.20 | Having an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7304.19.10.30 | Having an outside diameter exceeding 114.3 mm but less than 215.9 mm | 10-digit statistical code | |
| 7304.19.10.45 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.19.10.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.19.10.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.19.50 | Of other alloy steel | 8-digit subheading | Free |
| 7304.19.50.20 | Having an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7304.19.50.50 | Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.19.50.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.22.00 | Drill pipe of stainless steel | 8-digit subheading | Free |
| 7304.22.00.30 | Having a wall thickness not exceeding 9.5 mm | 10-digit statistical code | |
| 7304.22.00.45 | Having a wall thickness exceeding 9.5 mm | 10-digit statistical code | |
| 7304.22.00.60 | Having an outside diameter exceeding 168.3 mm | 10-digit statistical code | |
| 7304.23 | Other drill pipe | 6-digit heading | |
| 7304.23.30.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7304.23.60 | Of alloy steel | 8-digit subheading | Free |
| 7304.23.60.30 | Having a wall thickness not exceeding 9.5 mm | 10-digit statistical code | |
| 7304.23.60.45 | Having a wall thickness exceeding 9.5 mm | 10-digit statistical code | |
| 7304.23.60.60 | Having an outside diameter exceeding 168.3 mm | 10-digit statistical code | |
| 7304.24 | Other, of stainless steel | 6-digit heading | |
| 7304.24.30 | Threaded or coupled | 8-digit subheading | Free |
| 7304.24.30.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.24.30.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.24.30.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.24.30.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.24.30.45 | Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.24.30.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.24.40 | Other | 8-digit subheading | Free |
| 7304.24.40.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.24.40.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.24.40.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.24.40.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.24.40.50 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.24.40.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.24.40.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.24.60 | Tubing | 8-digit subheading | Free |
| 7304.24.60.15 | Having a wall thickness not exceeding 9.5 mm | 10-digit statistical code | |
| 7304.24.60.30 | Having a wall thickness exceeding 9.5 mm | 10-digit statistical code | |
| 7304.24.60.45 | Having an outside diameter exceeding 114.3 mm but less than 215.9 mm | 10-digit statistical code | |
| 7304.24.60.60 | Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.24.60.75 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29 | Other | 6-digit heading | |
| 7304.29.10 | Threaded or coupled | 8-digit subheading | Free |
| 7304.29.10.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.10.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.10.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.10.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.10.50 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.10.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.10.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.20 | Other | 8-digit subheading | Free |
| 7304.29.20.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.20.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.20.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.20.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.20.50 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.20.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.20.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.31 | Threaded or coupled | 8-digit subheading | Free |
| 7304.29.31.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.31.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.31.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.31.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.31.50 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.31.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.31.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.41 | Other | 8-digit subheading | Free |
| 7304.29.41.10 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.41.20 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.41.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.41.40 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.41.50 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.29.41.60 | Having a wall thickness of 12.7 mm or more | 10-digit statistical code | |
| 7304.29.41.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.50 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7304.29.50.15 | Having a wall thickness not exceeding 9.5 mm | 10-digit statistical code | |
| 7304.29.50.30 | Having a wall thickness exceeding 9.5 mm | 10-digit statistical code | |
| 7304.29.50.45 | Having an outside diameter exceeding 114.3 mm but less than 215.9 mm | 10-digit statistical code | |
| 7304.29.50.60 | Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.50.75 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.61 | Of other alloy steel | 8-digit subheading | Free |
| 7304.29.61.15 | Having a wall thickness not exceeding 9.5 mm | 10-digit statistical code | |
| 7304.29.61.30 | Having a wall thickness exceeding 9.5 mm | 10-digit statistical code | |
| 7304.29.61.45 | Having an outside diameter exceeding 114.3 mm but less than 215.9 mm | 10-digit statistical code | |
| 7304.29.61.60 | Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.29.61.75 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.31 | Cold-drawn or cold-rolled (cold-reduced) | 6-digit heading | |
| 7304.31.30.00 | Hollow bars | 10-digit statistical code | Free |
| 7304.31.60 | Other | 8-digit subheading | Free |
| 7304.31.60.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | 10-digit statistical code | |
| 7304.31.60.50 | Other | 10-digit statistical code | |
| 7304.39.00 | Other | 8-digit subheading | Free |
| 7304.39.00.02 | Having an outside diameter less than 38.1 mm | 10-digit statistical code | |
| 7304.39.00.04 | Having an outside diameter of 38.1 mm or more but less than 190.5 mm | 10-digit statistical code | |
| 7304.39.00.06 | Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm | 10-digit statistical code | |
| 7304.39.00.08 | Having an outside diameter exceeding 285.8 mm | 10-digit statistical code | |
| 7304.39.00.16 | Galvanized, having an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7304.39.00.20 | Having an outside diameter less than 38.1 mm | 10-digit statistical code | |
| 7304.39.00.24 | Having a wall thickness less than 6.4 mm | 10-digit statistical code | |
| 7304.39.00.28 | Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm | 10-digit statistical code | |
| 7304.39.00.32 | Having a wall thickness exceeding 12.7 mm | 10-digit statistical code | |
| 7304.39.00.36 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.39.00.40 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.39.00.44 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.39.00.48 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.39.00.52 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.39.00.56 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.39.00.62 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.39.00.68 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.39.00.72 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.39.00.76 | Having a wall thickness less than 19 mm | 10-digit statistical code | |
| 7304.39.00.80 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.41 | Cold-drawn or cold-rolled (cold-reduced) | 6-digit heading | |
| 7304.41.30 | Of an external diameter of less than 19 mm | 8-digit subheading | Free |
| 7304.41.30.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7304.41.30.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | 10-digit statistical code | |
| 7304.41.30.45 | Other | 10-digit statistical code | |
| 7304.41.60 | Other | 8-digit subheading | Free |
| 7304.41.60.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7304.41.60.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | 10-digit statistical code | |
| 7304.41.60.45 | Other | 10-digit statistical code | |
| 7304.49.00 | Other | 8-digit subheading | Free |
| 7304.49.00.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7304.49.00.15 | Hollow bars | 10-digit statistical code | |
| 7304.49.00.45 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | 10-digit statistical code | |
| 7304.49.00.60 | Other | 10-digit statistical code | |
| 7304.51 | Cold-drawn or cold-rolled (cold-reduced) | 6-digit heading | |
| 7304.51.10.00 | Suitable for use in the manufacture of ball or roller bearings | 10-digit statistical code | Free |
| 7304.51.50 | Other | 8-digit subheading | Free |
| 7304.51.50.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7304.51.50.15 | Of heat-resisting steel | 10-digit statistical code | |
| 7304.51.50.45 | Other | 10-digit statistical code | |
| 7304.51.50.60 | Other | 10-digit statistical code | |
| 7304.59 | Other | 6-digit heading | |
| 7304.59.10.00 | Suitable for use in the manufacture of ball or roller bearings | 10-digit statistical code | Free |
| 7304.59.20 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | 8-digit subheading | Free |
| 7304.59.20.30 | Of heat-resisting steel | 10-digit statistical code | |
| 7304.59.20.40 | Having an outside diameter less than 38.1 mm | 10-digit statistical code | |
| 7304.59.20.45 | Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm | 10-digit statistical code | |
| 7304.59.20.55 | Having an outside diameter exceeding 114.3 mm but less than 190.5 mm | 10-digit statistical code | |
| 7304.59.20.60 | Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm | 10-digit statistical code | |
| 7304.59.20.70 | Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm | 10-digit statistical code | |
| 7304.59.20.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.59.60.00 | Of heat-resisting steel | 10-digit statistical code | Free |
| 7304.59.80 | Other | 8-digit subheading | Free |
| 7304.59.80.10 | Having an outside diameter less than 38.1 mm | 10-digit statistical code | |
| 7304.59.80.15 | Having a wall thickness less than 6.4 mm | 10-digit statistical code | |
| 7304.59.80.20 | Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm | 10-digit statistical code | |
| 7304.59.80.25 | Having a wall thickness exceeding 12.7 mm | 10-digit statistical code | |
| 7304.59.80.30 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.59.80.35 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.59.80.40 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.59.80.45 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.59.80.50 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.59.80.55 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.59.80.60 | Having a wall thickness less than 12.7 mm | 10-digit statistical code | |
| 7304.59.80.65 | Having a wall thickness of 12.7 mm or more but less than 19 mm | 10-digit statistical code | |
| 7304.59.80.70 | Having a wall thickness of 19 mm or more | 10-digit statistical code | |
| 7304.59.80.80 | Having an outside diameter exceeding 406.4 mm | 10-digit statistical code | |
| 7304.90 | Other | 6-digit heading | |
| 7304.90.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7304.90.30.00 | Of alloy steel | 10-digit statistical code | Free |
| 7304.90.50.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7304.90.70.00 | Of alloy steel | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7305.11 | Longitudinally submerged arc welded | 6-digit heading | |
| 7305.11.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7305.11.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | 10-digit statistical code | |
| 7305.11.10.60 | With an external diameter exceeding 609.6 mm | 10-digit statistical code | |
| 7305.11.50.00 | Of alloy steel | 10-digit statistical code | Free |
| 7305.12 | Other, longitudinally welded | 6-digit heading | |
| 7305.12.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7305.12.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | 10-digit statistical code | |
| 7305.12.10.60 | With an external diameter exceeding 609.6 mm | 10-digit statistical code | |
| 7305.12.50.00 | Of alloy steel | 10-digit statistical code | Free |
| 7305.19 | Other | 6-digit heading | |
| 7305.19.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7305.19.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | 10-digit statistical code | |
| 7305.19.10.60 | With an external diameter exceeding 609.6 mm | 10-digit statistical code | |
| 7305.19.50.00 | Of alloy steel | 10-digit statistical code | Free |
| 7305.20 | Casing of a kind used in drilling for oil or gas | 6-digit heading | |
| 7305.20.20.00 | Threaded or coupled | 10-digit statistical code | Free |
| 7305.20.40.00 | Other | 10-digit statistical code | Free |
| 7305.20.60.00 | Threaded or coupled | 10-digit statistical code | Free |
| 7305.20.80.00 | Other | 10-digit statistical code | Free |
| 7305.31 | Longitudinally welded | 6-digit heading | |
| 7305.31.20.00 | Tapered pipes and tubes of steel principally used as parts of illuminating articles | 10-digit statistical code | Free |
| 7305.31.40.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7305.31.60 | Of alloy steel | 8-digit subheading | Free |
| 7305.31.60.10 | Of stainless steel | 10-digit statistical code | |
| 7305.31.60.90 | Other | 10-digit statistical code | |
| 7305.39 | Other | 6-digit heading | |
| 7305.39.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7305.39.50.00 | Of alloy steel | 10-digit statistical code | Free |
| 7305.90 | Other | 6-digit heading | |
| 7305.90.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7305.90.50.00 | Of alloy steel | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7306.11.00 | Welded, of stainless steel | 8-digit subheading | Free |
| 7306.11.00.10 | With an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.11.00.50 | With an outside diameter exceeding 114.3 mm | 10-digit statistical code | |
| 7306.19 | Other | 6-digit heading | |
| 7306.19.10 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7306.19.10.10 | With an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.19.10.50 | With an outside diameter exceeding 114.3 mm | 10-digit statistical code | |
| 7306.19.51 | Of alloy steel | 8-digit subheading | Free |
| 7306.19.51.10 | With an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.19.51.50 | With an outside diameter exceeding 114.3 mm | 10-digit statistical code | |
| 7306.21 | Welded of stainless steel | 6-digit heading | |
| 7306.21.30.00 | Threaded or coupled | 10-digit statistical code | Free |
| 7306.21.40.00 | Other | 10-digit statistical code | Free |
| 7306.21.80 | Tubing | 8-digit subheading | Free |
| 7306.21.80.10 | Imported with coupling | 10-digit statistical code | |
| 7306.21.80.50 | Other | 10-digit statistical code | |
| 7306.29 | Other | 6-digit heading | |
| 7306.29.10 | Threaded or coupled | 8-digit subheading | Free |
| 7306.29.10.30 | Imported with coupling | 10-digit statistical code | |
| 7306.29.10.90 | Other | 10-digit statistical code | |
| 7306.29.20.00 | Other | 10-digit statistical code | Free |
| 7306.29.31.00 | Threaded or coupled | 10-digit statistical code | Free |
| 7306.29.41.00 | Other | 10-digit statistical code | Free |
| 7306.29.60 | Of iron or nonalloy steel | 8-digit subheading | Free |
| 7306.29.60.10 | Imported with coupling | 10-digit statistical code | |
| 7306.29.60.50 | Other | 10-digit statistical code | |
| 7306.29.81 | Other | 8-digit subheading | Free |
| 7306.29.81.10 | Imported with coupling | 10-digit statistical code | |
| 7306.29.81.50 | Other | 10-digit statistical code | |
| 7306.30 | Other, welded, of circular cross section, of iron or nonalloy steel | 6-digit heading | |
| 7306.30.10 | Having a wall thickness of less than 1.65 mm | 8-digit subheading | Free |
| 7306.30.10.10 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit | 10-digit statistical code | |
| 7306.30.10.90 | Other | 10-digit statistical code | |
| 7306.30.30.00 | Tapered steel pipes and tubes principally used as parts of illuminating articles | 10-digit statistical code | Free |
| 7306.30.50 | Other | 8-digit subheading | Free |
| 7306.30.50.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn | 10-digit statistical code | |
| 7306.30.50.15 | Other, cold-drawn | 10-digit statistical code | |
| 7306.30.50.20 | Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm | 10-digit statistical code | |
| 7306.30.50.26 | With an outside diameter not exceeding 50.8 mm | 10-digit statistical code | |
| 7306.30.50.27 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.30.50.28 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit | 10-digit statistical code | |
| 7306.30.50.31 | With an outside diameter not exceeding 50.8 mm | 10-digit statistical code | |
| 7306.30.50.33 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.30.50.35 | Tube and pipe hollows for redrawing | 10-digit statistical code | |
| 7306.30.50.41 | With an outside diameter not exceeding 50.8 mm | 10-digit statistical code | |
| 7306.30.50.43 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.30.50.56 | With an outside diameter not exceeding 50.8 mm | 10-digit statistical code | |
| 7306.30.50.57 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.30.50.85 | Galvanized | 10-digit statistical code | |
| 7306.30.50.90 | Other | 10-digit statistical code | |
| 7306.40 | Other, welded, of circular cross section, of stainless steel | 6-digit heading | |
| 7306.40.10 | Having a wall thickness of less than 1.65 mm | 8-digit subheading | Free |
| 7306.40.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7306.40.10.15 | Other | 10-digit statistical code | |
| 7306.40.10.90 | Other | 10-digit statistical code | |
| 7306.40.50 | Having a wall thickness of 1.65 mm or more | 8-digit subheading | Free |
| 7306.40.50.05 | Of high-nickel alloy steel | 10-digit statistical code | |
| 7306.40.50.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn | 10-digit statistical code | |
| 7306.40.50.40 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7306.40.50.42 | Containing less than 15 percent by weight of chromium | 10-digit statistical code | |
| 7306.40.50.44 | Other | 10-digit statistical code | |
| 7306.40.50.62 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | 10-digit statistical code | |
| 7306.40.50.64 | Other | 10-digit statistical code | |
| 7306.40.50.80 | Other | 10-digit statistical code | |
| 7306.40.50.85 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | 10-digit statistical code | |
| 7306.40.50.90 | Other | 10-digit statistical code | |
| 7306.50 | Other, welded, of circular cross section, of other alloy steel | 6-digit heading | |
| 7306.50.10.00 | Having a wall thickness of less than 1.65 mm | 10-digit statistical code | Free |
| 7306.50.30.00 | Tapered pipes and tubes of steel principally used as parts of illuminating articles | 10-digit statistical code | Free |
| 7306.50.50 | Other | 8-digit subheading | Free |
| 7306.50.50.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn | 10-digit statistical code | |
| 7306.50.50.30 | Other, cold-drawn or cold-rolled (cold- reduced) | 10-digit statistical code | |
| 7306.50.50.50 | With an outside diameter not exceeding 114.3 mm | 10-digit statistical code | |
| 7306.50.50.70 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | 10-digit statistical code | |
| 7306.61 | Of square or rectangular cross section | 6-digit heading | |
| 7306.61.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7306.61.30.00 | Of alloy steel | 10-digit statistical code | Free |
| 7306.61.50.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7306.61.70 | Of alloy steel | 8-digit subheading | Free |
| 7306.61.70.30 | Of stainless steel | 10-digit statistical code | |
| 7306.61.70.60 | Other | 10-digit statistical code | |
| 7306.69 | Of other noncircular cross section | 6-digit heading | |
| 7306.69.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7306.69.30.00 | Of alloy steel | 10-digit statistical code | Free |
| 7306.69.50.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7306.69.70 | Of alloy steel | 8-digit subheading | Free |
| 7306.69.70.30 | Of stainless steel | 10-digit statistical code | |
| 7306.69.70.60 | Other | 10-digit statistical code | |
| 7306.90 | Other | 6-digit heading | |
| 7306.90.10.00 | Of iron or nonalloy steel | 10-digit statistical code | Free |
| 7306.90.50.00 | Of alloy steel | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7307.11.00 | Of nonmalleable cast iron | 8-digit subheading | 4.8% |
| 7307.11.00.30 | For threaded pipe | 10-digit statistical code | |
| 7307.11.00.45 | For cast-iron soil pipe | 10-digit statistical code | |
| 7307.11.00.60 | Other | 10-digit statistical code | |
| 7307.19 | Other | 6-digit heading | |
| 7307.19.30 | Ductile fittings | 8-digit subheading | 5.6% |
| 7307.19.30.40 | Grooved-end fittings (including grooved couplings) | 10-digit statistical code | |
| 7307.19.30.60 | Threaded | 10-digit statistical code | |
| 7307.19.30.70 | With mechanical, push-on (rubber compression) or flanged joints attached | 10-digit statistical code | |
| 7307.19.30.85 | Other | 10-digit statistical code | |
| 7307.19.90 | Other | 8-digit subheading | 6.2% |
| 7307.19.90.30 | Unions | 10-digit statistical code | |
| 7307.19.90.40 | Grooved-end fittings (including grooved couplings) | 10-digit statistical code | |
| 7307.19.90.60 | Threaded | 10-digit statistical code | |
| 7307.19.90.80 | Other | 10-digit statistical code | |
| 7307.21 | Flanges | 6-digit heading | |
| 7307.21.10.00 | Not machined, not tooled and not otherwise processed after forging | 10-digit statistical code | 3.3% |
| 7307.21.50.00 | Other | 10-digit statistical code | 5.6% |
| 7307.22 | Threaded elbows, bends and sleeves | 6-digit heading | |
| 7307.22.10.00 | Sleeves (couplings) | 10-digit statistical code | Free |
| 7307.22.50.00 | Other | 10-digit statistical code | 6.2% |
| 7307.23.00 | Butt welding fittings | 8-digit subheading | 5% |
| 7307.23.00.30 | Not machined, not tooled and not otherwise processed after forming | 10-digit statistical code | |
| 7307.23.00.90 | Other | 10-digit statistical code | |
| 7307.29.00 | Other | 8-digit subheading | 5% |
| 7307.29.00.30 | Nipples | 10-digit statistical code | |
| 7307.29.00.90 | Other | 10-digit statistical code | |
| 7307.91 | Flanges | 6-digit heading | |
| 7307.91.10.00 | Of iron or nonalloy steel | 10-digit statistical code | 3.3% |
| 7307.91.30.00 | Of alloy steel (except stainless steel) | 10-digit statistical code | 3.2% |
| 7307.91.50 | Other | 8-digit subheading | 5.5% |
| 7307.91.50.10 | Of iron or nonalloy steel | 10-digit statistical code | |
| 7307.91.50.30 | Of alloy steel (except stainless steel) | 10-digit statistical code | |
| 7307.91.50.50 | Of iron or nonalloy steel | 10-digit statistical code | |
| 7307.91.50.70 | Of alloy steel (except stainless steel) | 10-digit statistical code | |
| 7307.92 | Threaded elbows, bends and sleeves | 6-digit heading | |
| 7307.92.30 | Sleeves (couplings) | 8-digit subheading | Free |
| 7307.92.30.10 | Of iron or nonalloy steel | 10-digit statistical code | |
| 7307.92.30.30 | Of alloy steel (except stainless steel) | 10-digit statistical code | |
| 7307.92.90.00 | Other | 10-digit statistical code | 6.2% |
| 7307.93 | Butt welding fittings | 6-digit heading | |
| 7307.93.30 | Of iron or nonalloy steel | 8-digit subheading | 6.2% |
| 7307.93.30.10 | Not machined, not tooled and not otherwise processed after forging | 10-digit statistical code | |
| 7307.93.30.40 | Other | 10-digit statistical code | |
| 7307.93.60.00 | Of alloy steel (except stainless steel) | 10-digit statistical code | 5.5% |
| 7307.93.90 | With an inside diameter of 360 mm or more | 8-digit subheading | 4.3% |
| 7307.93.90.10 | Not machined, not tooled and not otherwise processed after forging | 10-digit statistical code | |
| 7307.93.90.40 | Other | 10-digit statistical code | |
| 7307.93.90.60 | Of alloy steel (except stainless steel) | 10-digit statistical code | |
| 7307.99 | Other | 6-digit heading | |
| 7307.99.10.00 | Of iron or nonalloy steel | 10-digit statistical code | 3.7% |
| 7307.99.30.00 | Of alloy steel (except stainless steel) | 10-digit statistical code | 3.2% |
| 7307.99.50 | Other | 8-digit subheading | 4.3% |
| 7307.99.50.15 | Nipples | 10-digit statistical code | |
| 7307.99.50.45 | Other | 10-digit statistical code | |
| 7307.99.50.60 | Of alloy steel (except stainless steel) | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7308.10.00.00 | Bridges and bridge sections | 10-digit statistical code | Free |
| 7308.20.00 | Towers and lattice masts | 8-digit subheading | Free |
| 7308.20.00.30 | Tubular, whether or not tapered, and sectional components thereof | 10-digit statistical code | |
| 7308.20.00.35 | Tubular wind turbine towers, whether or not tapered, and sectional components thereof | 10-digit statistical code | |
| 7308.20.00.90 | Other | 10-digit statistical code | |
| 7308.30 | Doors, windows and their frames and thresholds for doors | 6-digit heading | |
| 7308.30.10.00 | Of stainless steel | 10-digit statistical code | Free |
| 7308.30.50 | Other | 8-digit subheading | Free |
| 7308.30.50.15 | Windows and their frames | 10-digit statistical code | |
| 7308.30.50.25 | Thresholds for doors | 10-digit statistical code | |
| 7308.30.50.50 | Other | 10-digit statistical code | |
| 7308.40.00.00 | Equipment for scaffolding, shuttering, propping or pit- propping | 10-digit statistical code | Free |
| 7308.90 | Other | 6-digit heading | |
| 7308.90.30.00 | Not in part of alloy steel | 10-digit statistical code | Free |
| 7308.90.60.00 | Other | 10-digit statistical code | Free |
| 7308.90.70.00 | Steel grating | 10-digit statistical code | Free |
| 7308.90.95 | Other | 8-digit subheading | Free |
| 7308.90.95.30 | Sheet-metal roofing, siding, flooring and roof drainage equipment | 10-digit statistical code | |
| 7308.90.95.60 | Architectural and ornamental work | 10-digit statistical code | |
| 7308.90.95.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7309.00.00.30 | Tanks | 10-digit statistical code | |
| 7309.00.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7310.10.00 | Of a capacity of 50 liters or more | 8-digit subheading | Free |
| 7310.10.00.05 | Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter. | 10-digit statistical code | |
| 7310.10.00.15 | Empty steel drums and barrels | 10-digit statistical code | |
| 7310.10.00.90 | Other | 10-digit statistical code | |
| 7310.21.00 | Cans which are to be closed by soldering or crimping | 8-digit subheading | Free |
| 7310.21.00.25 | Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods | 10-digit statistical code | |
| 7310.21.00.70 | Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols | 10-digit statistical code | |
| 7310.21.00.75 | Other | 10-digit statistical code | |
| 7310.29.00 | Other | 8-digit subheading | Free |
| 7310.29.00.20 | Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter | 10-digit statistical code | |
| 7310.29.00.30 | Other | 10-digit statistical code | |
| 7310.29.00.55 | Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter | 10-digit statistical code | |
| 7310.29.00.65 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7311.00.00.30 | Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number | 10-digit statistical code | |
| 7311.00.00.60 | Other | 10-digit statistical code | |
| 7311.00.00.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7312.10 | Stranded wire, ropes and cables | 6-digit heading | |
| 7312.10.05.00 | Fitted with fittings or made up into articles | 10-digit statistical code | Free |
| 7312.10.10 | Other | 8-digit subheading | Free |
| 7312.10.10.30 | Tire cord | 10-digit statistical code | |
| 7312.10.10.50 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | 10-digit statistical code | |
| 7312.10.10.70 | Other | 10-digit statistical code | |
| 7312.10.20.00 | Fitted with fittings or made up into articles | 10-digit statistical code | Free |
| 7312.10.30 | Other | 8-digit subheading | Free |
| 7312.10.30.05 | Tire cord | 10-digit statistical code | |
| 7312.10.30.10 | Covered with textile or other non- metallic material | 10-digit statistical code | |
| 7312.10.30.12 | Other | 10-digit statistical code | |
| 7312.10.30.20 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | 10-digit statistical code | |
| 7312.10.30.45 | Of brass plated wire | 10-digit statistical code | |
| 7312.10.30.65 | ACSR core strand | 10-digit statistical code | |
| 7312.10.30.70 | Covered with textile or other nonmetallic material | 10-digit statistical code | |
| 7312.10.30.74 | Other | 10-digit statistical code | |
| 7312.10.30.80 | Other | 10-digit statistical code | |
| 7312.10.50.00 | Fitted with fittings or made up into articles | 10-digit statistical code | Free |
| 7312.10.60 | Other | 8-digit subheading | Free |
| 7312.10.60.30 | With a diameter not exceeding 9.5 mm | 10-digit statistical code | |
| 7312.10.60.60 | Other | 10-digit statistical code | |
| 7312.10.70.00 | Fitted with fittings or made up into articles | 10-digit statistical code | Free |
| 7312.10.80.00 | Of brass plated wire | 10-digit statistical code | Free |
| 7312.10.90 | Other | 8-digit subheading | Free |
| 7312.10.90.30 | With a diameter not exceeding 9.5 mm | 10-digit statistical code | |
| 7312.10.90.60 | With a diameter exceeding 9.5 mm | 10-digit statistical code | |
| 7312.10.90.90 | Other | 10-digit statistical code | |
| 7312.90.00.00 | Other | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7314.12 | Endless bands for machinery, of stainless steel | 6-digit heading | |
| 7314.12.10.00 | With meshes not finer than 12 wires to the lineal centimeter in warp or filling | 10-digit statistical code | Free |
| 7314.12.20.00 | With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | 10-digit statistical code | Free |
| 7314.12.30.00 | With 94 or more wires to the lineal centimeter | 10-digit statistical code | Free |
| 7314.12.60.00 | Other | 10-digit statistical code | Free |
| 7314.12.90.00 | Other | 10-digit statistical code | Free |
| 7314.14 | Other woven cloth, of stainless steel | 6-digit heading | |
| 7314.14.10.00 | With meshes not finer than 12 wires to the lineal centimeter in warp or filling | 10-digit statistical code | Free |
| 7314.14.20.00 | With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | 10-digit statistical code | Free |
| 7314.14.30.00 | With 94 or more wires to the lineal centimeter | 10-digit statistical code | Free |
| 7314.14.60.00 | Other | 10-digit statistical code | Free |
| 7314.14.90.00 | Other | 10-digit statistical code | Free |
| 7314.19.01.00 | Other | 10-digit statistical code | Free |
| 7314.20.00.00 | Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | 10-digit statistical code | Free |
| 7314.31 | Plated or coated with zinc | 6-digit heading | |
| 7314.31.10.00 | Wire fencing plated or coated with zinc, whether or not covered with plastic material | 10-digit statistical code | Free |
| 7314.31.50 | Other | 8-digit subheading | Free |
| 7314.31.50.10 | Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire | 10-digit statistical code | |
| 7314.31.50.80 | Other | 10-digit statistical code | |
| 7314.39.00.00 | Other | 10-digit statistical code | Free |
| 7314.41.00 | Plated or coated with zinc | 8-digit subheading | Free |
| 7314.41.00.30 | Chain link fencing | 10-digit statistical code | |
| 7314.41.00.40 | Of wire with maximum cross- sectional dimension of 1 mm | 10-digit statistical code | |
| 7314.41.00.45 | Other | 10-digit statistical code | |
| 7314.41.00.80 | Other | 10-digit statistical code | |
| 7314.42.00 | Coated with plastics | 8-digit subheading | Free |
| 7314.42.00.30 | Chain link fencing | 10-digit statistical code | |
| 7314.42.00.60 | Other | 10-digit statistical code | |
| 7314.49 | Other | 6-digit heading | |
| 7314.49.30.00 | Not cut to shape | 10-digit statistical code | Free |
| 7314.49.60.00 | Cut to shape | 10-digit statistical code | Free |
| 7314.50.00.00 | Expanded metal | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7315.11.00 | Roller chain | 8-digit subheading | Free |
| 7315.11.00.05 | For motor vehicles | 10-digit statistical code | |
| 7315.11.00.10 | Bicycle chains | 10-digit statistical code | |
| 7315.11.00.45 | Other | 10-digit statistical code | |
| 7315.11.00.60 | Other | 10-digit statistical code | |
| 7315.12.00 | Other chain | 8-digit subheading | Free |
| 7315.12.00.20 | Of not over 50 mm pitch and containing more than 3 parts per pitch | 10-digit statistical code | |
| 7315.12.00.40 | Welded steel chain | 10-digit statistical code | |
| 7315.12.00.60 | Cast and combination chain | 10-digit statistical code | |
| 7315.12.00.80 | Other | 10-digit statistical code | |
| 7315.19.00.00 | Parts | 10-digit statistical code | Free |
| 7315.20 | Skid chain | 6-digit heading | |
| 7315.20.10.00 | Not over 8 mm in diameter | 10-digit statistical code | Free |
| 7315.20.50.00 | Over 8 mm in diameter | 10-digit statistical code | Free |
| 7315.81.00.00 | Stud link | 10-digit statistical code | Free |
| 7315.82 | Other, welded link | 6-digit heading | |
| 7315.82.10.00 | Not over 10 mm in diameter | 10-digit statistical code | Free |
| 7315.82.30.00 | Over 10 mm in diameter | 10-digit statistical code | Free |
| 7315.82.50.00 | Not over 10 mm in diameter | 10-digit statistical code | Free |
| 7315.82.70.00 | Over 10 mm in diameter | 10-digit statistical code | Free |
| 7315.89 | Other | 6-digit heading | |
| 7315.89.10.00 | Not over 8 mm in diameter | 10-digit statistical code | 1.5% |
| 7315.89.30.00 | Over 8 mm in diameter | 10-digit statistical code | Free |
| 7315.89.50.00 | Other | 10-digit statistical code | 3.9% |
| 7315.90.00.00 | Other parts | 10-digit statistical code | 2.9% |
| HTS code | Description | Level | General duty rate |
|---|
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7317.00.10.00 | Thumb tacks | 10-digit statistical code | Free |
| 7317.00.20.00 | Not threaded | 10-digit statistical code | Free |
| 7317.00.30.00 | Threaded | 10-digit statistical code | Free |
| 7317.00.55 | Made of round wire | 8-digit subheading | Free |
| 7317.00.55.01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | 10-digit statistical code | |
| 7317.00.55.02 | Galvanized | 10-digit statistical code | |
| 7317.00.55.03 | Other | 10-digit statistical code | |
| 7317.00.55.05 | Galvanized | 10-digit statistical code | |
| 7317.00.55.07 | Other | 10-digit statistical code | |
| 7317.00.55.08 | Assembled in a paper strip | 10-digit statistical code | |
| 7317.00.55.11 | Assembled in a wire strip | 10-digit statistical code | |
| 7317.00.55.18 | Other | 10-digit statistical code | |
| 7317.00.55.19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | 10-digit statistical code | |
| 7317.00.55.20 | Not coated, plated or painted | 10-digit statistical code | |
| 7317.00.55.30 | Galvanized | 10-digit statistical code | |
| 7317.00.55.40 | Vinyl, resin or cement coated | 10-digit statistical code | |
| 7317.00.55.50 | Other | 10-digit statistical code | |
| 7317.00.55.60 | Not coated, plated or painted | 10-digit statistical code | |
| 7317.00.55.70 | Galvanized | 10-digit statistical code | |
| 7317.00.55.80 | Vinyl, resin or cement coated | 10-digit statistical code | |
| 7317.00.55.90 | Other | 10-digit statistical code | |
| 7317.00.65 | Other | 8-digit subheading | Free |
| 7317.00.65.30 | Cut | 10-digit statistical code | |
| 7317.00.65.60 | Other | 10-digit statistical code | |
| 7317.00.75.00 | Of two or more pieces | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7318.11.00.00 | Coach screws | 10-digit statistical code | 12.5% |
| 7318.12.00.00 | Other wood screws | 10-digit statistical code | 12.5% |
| 7318.13.00 | Screw hooks and screw rings | 8-digit subheading | 5.7% |
| 7318.13.00.30 | Having shanks or threads with a diameter of less than 6 mm | 10-digit statistical code | |
| 7318.13.00.60 | Having shanks or threads with a diameter of 6 mm or more | 10-digit statistical code | |
| 7318.14 | Self-tapping screws | 6-digit heading | |
| 7318.14.10 | Having shanks or threads with a diameter of less than 6 mm | 8-digit subheading | 6.2% |
| 7318.14.10.30 | Of stainless steel | 10-digit statistical code | |
| 7318.14.10.60 | Other | 10-digit statistical code | |
| 7318.14.50 | Having shanks or threads with a diameter of 6 mm or more | 8-digit subheading | 8.6% |
| 7318.14.50.20 | Of stainless steel | 10-digit statistical code | |
| 7318.14.50.80 | Other | 10-digit statistical code | |
| 7318.15 | Other screws and bolts, whether or not with their nuts or washers | 6-digit heading | |
| 7318.15.20 | Bolts and bolts and their nuts or washers entered or exported in the same shipment | 8-digit subheading | Free |
| 7318.15.20.10 | Having shanks or threads with a diameter of less than 6 mm | 10-digit statistical code | |
| 7318.15.20.20 | Track bolts | 10-digit statistical code | |
| 7318.15.20.30 | Structural bolts | 10-digit statistical code | |
| 7318.15.20.41 | Right-angle anchor bolts | 10-digit statistical code | |
| 7318.15.20.46 | Other | 10-digit statistical code | |
| 7318.15.20.51 | Of stainless steel | 10-digit statistical code | |
| 7318.15.20.55 | Other | 10-digit statistical code | |
| 7318.15.20.61 | Of stainless steel | 10-digit statistical code | |
| 7318.15.20.65 | Other | 10-digit statistical code | |
| 7318.15.20.91 | Of stainless steel | 10-digit statistical code | |
| 7318.15.20.95 | Other | 10-digit statistical code | |
| 7318.15.40.00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | 10-digit statistical code | Free |
| 7318.15.50 | Studs | 8-digit subheading | Free |
| 7318.15.50.30 | Of stainless steel | 10-digit statistical code | |
| 7318.15.50.51 | Of alloy steel | 10-digit statistical code | |
| 7318.15.50.56 | Other | 10-digit statistical code | |
| 7318.15.50.90 | Other | 10-digit statistical code | |
| 7318.15.60 | Having shanks or threads with a diameter of less than 6 mm | 8-digit subheading | 6.2% |
| 7318.15.60.10 | Of stainless steel | 10-digit statistical code | |
| 7318.15.60.40 | Other | 10-digit statistical code | |
| 7318.15.60.70 | Of stainless steel | 10-digit statistical code | |
| 7318.15.60.80 | Other | 10-digit statistical code | |
| 7318.15.80 | Having shanks or threads with a diameter of 6 mm or more | 8-digit subheading | 8.5% |
| 7318.15.80.20 | Set screws | 10-digit statistical code | |
| 7318.15.80.30 | Of stainless steel | 10-digit statistical code | |
| 7318.15.80.45 | Other | 10-digit statistical code | |
| 7318.15.80.55 | Of stainless steel | 10-digit statistical code | |
| 7318.15.80.66 | Cap screws | 10-digit statistical code | |
| 7318.15.80.69 | Other | 10-digit statistical code | |
| 7318.15.80.82 | Of stainless steel | 10-digit statistical code | |
| 7318.15.80.85 | Other | 10-digit statistical code | |
| 7318.16.00 | Nuts | 8-digit subheading | Free |
| 7318.16.00.15 | Non-locking chrome-plated | 10-digit statistical code | |
| 7318.16.00.30 | Locking | 10-digit statistical code | |
| 7318.16.00.45 | Other | 10-digit statistical code | |
| 7318.16.00.60 | Of stainless steel | 10-digit statistical code | |
| 7318.16.00.85 | Other | 10-digit statistical code | |
| 7318.19.00.00 | Other | 10-digit statistical code | 5.7% |
| 7318.21.00 | Spring washers and other lock washers | 8-digit subheading | 5.8% |
| 7318.21.00.30 | Helical spring lock washers | 10-digit statistical code | |
| 7318.21.00.90 | Other | 10-digit statistical code | |
| 7318.22.00.00 | Other washers | 10-digit statistical code | Free |
| 7318.23.00.00 | Rivets | 10-digit statistical code | Free |
| 7318.24.00.00 | Cotters and cotter pins | 10-digit statistical code | 3.8% |
| 7318.29.00.00 | Other | 10-digit statistical code | 2.8% |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7319.40 | Safety pins and other pins | 6-digit heading | |
| 7319.40.20 | Safety pins | 8-digit subheading | 4.5% |
| 7319.40.20.10 | On cards | 10-digit statistical code | |
| 7319.40.20.50 | Other | 10-digit statistical code | |
| 7319.40.30.00 | Dressmakers' or common pins | 10-digit statistical code | 4.1% |
| 7319.40.50 | Other | 8-digit subheading | Free |
| 7319.40.50.10 | Push pins | 10-digit statistical code | |
| 7319.40.50.50 | Other | 10-digit statistical code | |
| 7319.90 | Other | 6-digit heading | |
| 7319.90.10.00 | Sewing, darning or embroidery needles | 10-digit statistical code | Free |
| 7319.90.90.00 | Other | 10-digit statistical code | 2.9% |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7320.10 | Leaf springs and leaves therefor | 6-digit heading | |
| 7320.10.30.00 | To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons | 10-digit statistical code | 3.2% |
| 7320.10.60 | Other | 8-digit subheading | 3.2% |
| 7320.10.60.15 | Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor | 10-digit statistical code | |
| 7320.10.60.60 | Other | 10-digit statistical code | |
| 7320.10.90 | Other | 8-digit subheading | 3.2% |
| 7320.10.90.15 | Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor | 10-digit statistical code | |
| 7320.10.90.60 | Other | 10-digit statistical code | |
| 7320.20 | Helical springs | 6-digit heading | |
| 7320.20.10.00 | Suitable for motor-vehicle suspension | 10-digit statistical code | 3.2% |
| 7320.20.50 | Other | 8-digit subheading | 3.9% |
| 7320.20.50.10 | Suitable for use in mattress supports and mattresses of heading 9404 | 10-digit statistical code | |
| 7320.20.50.20 | Other | 10-digit statistical code | |
| 7320.20.50.45 | Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm | 10-digit statistical code | |
| 7320.20.50.60 | Other | 10-digit statistical code | |
| 7320.90 | Other | 6-digit heading | |
| 7320.90.10.00 | Hairsprings | 10-digit statistical code | Free |
| 7320.90.50 | Other | 8-digit subheading | 2.9% |
| 7320.90.50.10 | Suitable for use in mattress supports and mattresses of heading 9404 | 10-digit statistical code | |
| 7320.90.50.20 | Other | 10-digit statistical code | |
| 7320.90.50.60 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7321.11 | For gas fuel or for both gas and other fuels | 6-digit heading | |
| 7321.11.10 | Portable | 8-digit subheading | 5.7% |
| 7321.11.10.30 | Stoves or ranges | 10-digit statistical code | |
| 7321.11.10.60 | Other | 10-digit statistical code | |
| 7321.11.30 | Stoves or ranges | 8-digit subheading | Free |
| 7321.11.30.10 | Of a maximum width not exceeding 70 centimeters | 10-digit statistical code | |
| 7321.11.30.20 | Of a maximum width exceeding 70 but not exceeding 80 centimeters | 10-digit statistical code | |
| 7321.11.30.50 | Of a maximum width exceeding 80 centimeters | 10-digit statistical code | |
| 7321.11.60.00 | Other | 10-digit statistical code | Free |
| 7321.12.00.00 | For liquid fuel | 10-digit statistical code | Free |
| 7321.19.00 | Other, including appliances for solid fuel | 8-digit subheading | Free |
| 7321.19.00.20 | Hibachis | 10-digit statistical code | |
| 7321.19.00.40 | Other | 10-digit statistical code | |
| 7321.19.00.60 | Of cast iron | 10-digit statistical code | |
| 7321.19.00.80 | Other | 10-digit statistical code | |
| 7321.81 | For gas fuel or for both gas and other fuels | 6-digit heading | |
| 7321.81.10.00 | Portable | 10-digit statistical code | 2.9% |
| 7321.81.50.00 | Other | 10-digit statistical code | Free |
| 7321.82 | For liquid fuel | 6-digit heading | |
| 7321.82.10.00 | Portable | 10-digit statistical code | 2.9% |
| 7321.82.50.00 | Other | 10-digit statistical code | Free |
| 7321.89.00 | Other, including appliances for solid fuel | 8-digit subheading | Free |
| 7321.89.00.10 | Fireplace grates of cast iron | 10-digit statistical code | |
| 7321.89.00.50 | Other | 10-digit statistical code | |
| 7321.90 | Parts | 6-digit heading | |
| 7321.90.10.00 | Cooking chambers, whether or not assembled | 10-digit statistical code | Free |
| 7321.90.20.00 | Top surface panels with or without burners or controls | 10-digit statistical code | Free |
| 7321.90.40.00 | Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation | 10-digit statistical code | Free |
| 7321.90.50.00 | Other | 10-digit statistical code | Free |
| 7321.90.60 | Other | 8-digit subheading | Free |
| 7321.90.60.40 | Shelving and racks for cooking ovens | 10-digit statistical code | |
| 7321.90.60.60 | Other | 10-digit statistical code | |
| 7321.90.60.90 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7322.11.00.00 | Of cast iron | 10-digit statistical code | Free |
| 7322.19.00.00 | Other | 10-digit statistical code | Free |
| 7322.90.00 | Other, including parts | 8-digit subheading | Free |
| 7322.90.00.15 | Air heaters, not electrically heated, incorporating a motor-driven fan or blower | 10-digit statistical code | |
| 7322.90.00.30 | Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower | 10-digit statistical code | |
| 7322.90.00.45 | Parts of air heaters and hot air distributors | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7323.10.00.00 | Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 10-digit statistical code | Free |
| 7323.91 | Of cast iron, not enameled | 6-digit heading | |
| 7323.91.10.00 | Coated or plated with precious metal | 10-digit statistical code | Free |
| 7323.91.50 | Other | 8-digit subheading | 5.3% |
| 7323.91.50.20 | Bakeware (cookware not suitable for stove top use) | 10-digit statistical code | |
| 7323.91.50.40 | Other | 10-digit statistical code | |
| 7323.92.00 | Of cast iron, enameled | 8-digit subheading | Free |
| 7323.92.00.20 | Bakeware (cookware not suitable for stove top use) | 10-digit statistical code | |
| 7323.92.00.40 | Other | 10-digit statistical code | |
| 7323.93.00 | Of stainless steel | 8-digit subheading | 2% |
| 7323.93.00.15 | Teakettles | 10-digit statistical code | |
| 7323.93.00.35 | Bakeware (cookware not suitable for stove top use) | 10-digit statistical code | |
| 7323.93.00.45 | Other | 10-digit statistical code | |
| 7323.93.00.60 | Kitchen ware | 10-digit statistical code | |
| 7323.93.00.80 | Other | 10-digit statistical code | |
| 7323.94.00 | Of iron (other than cast iron) or steel, enameled | 8-digit subheading | 2.7% |
| 7323.94.00.10 | Teakettles | 10-digit statistical code | |
| 7323.94.00.21 | Bakeware (cookware not suitable for stove top use) | 10-digit statistical code | |
| 7323.94.00.26 | Other | 10-digit statistical code | |
| 7323.94.00.30 | Kitchen ware | 10-digit statistical code | |
| 7323.94.00.40 | Other | 10-digit statistical code | |
| 7323.94.00.80 | Other | 10-digit statistical code | |
| 7323.99 | Other | 6-digit heading | |
| 7323.99.10.00 | Coated or plated with silver | 10-digit statistical code | Free |
| 7323.99.30.00 | Other | 10-digit statistical code | 8.2% |
| 7323.99.50 | Of tinplate | 8-digit subheading | Free |
| 7323.99.50.30 | Kitchen or tableware suitable for food or drink contact | 10-digit statistical code | |
| 7323.99.50.60 | Other | 10-digit statistical code | |
| 7323.99.70.00 | Cookingware | 10-digit statistical code | 5.3% |
| 7323.99.90 | Other | 8-digit subheading | 3.4% |
| 7323.99.90.30 | Kitchen or tableware suitable for food or drink contact | 10-digit statistical code | |
| 7323.99.90.40 | Gates for confining children or pets | 10-digit statistical code | |
| 7323.99.90.80 | Other | 10-digit statistical code |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7324.10.00 | Sinks and wash basins, of stainless steel | 8-digit subheading | 3.4% |
| 7324.10.00.10 | Stainless steel sinks with one or more drawn bowls (basins) | 10-digit statistical code | |
| 7324.10.00.50 | Other | 10-digit statistical code | |
| 7324.21 | Of cast iron, whether or not enamelled | 6-digit heading | |
| 7324.21.10.00 | Coated or plated with precious metal | 10-digit statistical code | Free |
| 7324.21.50.00 | Other | 10-digit statistical code | Free |
| 7324.29.00.00 | Other | 10-digit statistical code | Free |
| 7324.90.00.00 | Other, including parts | 10-digit statistical code | Free |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7325.10.00 | Of nonmalleable cast iron | 8-digit subheading | Free |
| 7325.10.00.10 | Manhole covers, rings and frames | 10-digit statistical code | |
| 7325.10.00.20 | Catch basins, grates and frames | 10-digit statistical code | |
| 7325.10.00.25 | Cleanout covers and frames | 10-digit statistical code | |
| 7325.10.00.30 | Valve and service boxes | 10-digit statistical code | |
| 7325.10.00.35 | Meter boxes | 10-digit statistical code | |
| 7325.10.00.80 | Other | 10-digit statistical code | |
| 7325.91.00.00 | Grinding balls and similar articles for mills | 10-digit statistical code | 2.9% |
| 7325.99 | Other | 6-digit heading | |
| 7325.99.10.00 | Of cast iron | 10-digit statistical code | Free |
| 7325.99.50.00 | Other | 10-digit statistical code | 2.9% |
| HTS code | Description | Level | General duty rate |
|---|---|---|---|
| 7326.11.00.00 | Grinding balls and similar articles for mills | 10-digit statistical code | Free |
| 7326.19.00 | Other | 8-digit subheading | 2.9% |
| 7326.19.00.10 | Forged | 10-digit statistical code | |
| 7326.19.00.80 | Other | 10-digit statistical code | |
| 7326.20.00 | Articles of iron or steel wire | 8-digit subheading | 3.9% |
| 7326.20.00.10 | Belts and belting | 10-digit statistical code | |
| 7326.20.00.20 | Garment hangers | 10-digit statistical code | |
| 7326.20.00.30 | Sod staples, U staples, irrigation staples, ground staples, and ground pins | 10-digit statistical code | |
| 7326.20.00.40 | Double loop bar ties and double loop wire ties | 10-digit statistical code | |
| 7326.20.00.55 | Paint roller frames | 10-digit statistical code | |
| 7326.20.00.90 | Other | 10-digit statistical code | |
| 7326.90 | Other | 6-digit heading | |
| 7326.90.10.00 | Of tinplate | 10-digit statistical code | Free |
| 7326.90.25.00 | Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length | 10-digit statistical code | Free |
| 7326.90.35.00 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 10-digit statistical code | 7.8% |
| 7326.90.45.00 | Horse and mule shoes | 10-digit statistical code | Free |
| 7326.90.60.00 | Coated or plated with precious metal | 10-digit statistical code | 8.6% |
| 7326.90.86 | Other | 8-digit subheading | 2.9% |
| 7326.90.86.05 | Rods for electrical grounding | 10-digit statistical code | |
| 7326.90.86.10 | Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material | 10-digit statistical code | |
| 7326.90.86.30 | Hangers and similar supports for tubes and pipes | 10-digit statistical code | |
| 7326.90.86.35 | Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates | 10-digit statistical code | |
| 7326.90.86.45 | Barbed tape | 10-digit statistical code | |
| 7326.90.86.60 | Ladders | 10-digit statistical code | |
| 7326.90.86.75 | Paint roller frames (other than of iron or steel wire) | 10-digit statistical code | |
| 7326.90.86.76 | Metal handles for brooms, mops, paint applicators and similar products | 10-digit statistical code | |
| 7326.90.86.77 | Burial caskets | 10-digit statistical code | |
| 7326.90.86.88 | Other | 10-digit statistical code |
Not sure which line applies?
Classification follows the General Rules of Interpretation: the most specific description wins, and you must use a 10-digit statistical code on the entry. When two lines look equally plausible, a CBP binding ruling is the only way to be certain.
Source: USITC Harmonized Tariff Schedule, 2026 Basic Edition, Revision 16. Rate text is reproduced verbatim from the official export; category paths and duty estimates are derived.
Data loaded August 18, 2026.Check this chapter on hts.usitc.govReport an errorHow this data is built